View previous topic :: View next topic |
Author |
Message |
rbautch
Joined: 24 Sep 2011 Posts: 15
|
Posted: Thu Oct 01, 2015 12:28 pm Post subject: |
|
|
It doesn't seem to work. When I upload to the remote I get an error that says "writeRemote returned -1". |
|
Back to top |
|
|
rbautch
Joined: 24 Sep 2011 Posts: 15
|
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Thu Oct 01, 2015 1:37 pm Post subject: |
|
|
rbautch wrote: | It doesn't seem to work. When I upload to the remote I get an error that says "writeRemote returned -1". |
Thats a general write failure and I don't think has anything to do with the RDF (as long as the writable areas in the RDF are right, which they are since there is no difference between the two variants)
I'm using that starter RDF for the development of an extender (which I can't seem to make work) and have not had issues with writing or reading to/from the remote. _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Thu Oct 01, 2015 2:47 pm Post subject: |
|
|
rbautch wrote: | I got the RDF for the 422-1 remote from the "RDF-Development" section in the File Section, and that works just fine with my 422-1 remotes... | Thanks for that info, http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13332
As unclemiltie said, that RDF does also work with Inteset 422-2.
So far the only thing is that, in the device layout page, functions can't directly be allocated to the set of four coloured buttons. Is there a reason for that?
(they do work if keymoved to those buttons) |
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Thu Oct 01, 2015 3:15 pm Post subject: |
|
|
The list of buttons that can be "directly" programmed in an upgrade (versus all of them that can be in key moves) is determined by a table in the remote that has a list of keys for each device type.
If those buttons are only for key moves then either (1) the remote doesn't allow them on direct upgrades or (2) the list in the RDF is wrong and doesn't match the remote.
My bet is that it's (1) since the RDF guys have ways of figuring this stuff out and they're pretty good at it. _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
rbautch
Joined: 24 Sep 2011 Posts: 15
|
Posted: Thu Oct 01, 2015 4:14 pm Post subject: |
|
|
I got it working using the link to the 422-1 RDF posted above. I was using an older version of the original 422 RDF dated 11/7/14. Thanks for the help! |
|
Back to top |
|
|
rbautch
Joined: 24 Sep 2011 Posts: 15
|
Posted: Thu Oct 01, 2015 4:25 pm Post subject: |
|
|
tranx wrote: | rbautch wrote: | I got the RDF for the 422-1 remote from the "RDF-Development" section in the File Section, and that works just fine with my 422-1 remotes... | Thanks for that info, http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13332
As unclemiltie said, that RDF does also work with Inteset 422-2.
So far the only thing is that, in the device layout page, functions can't directly be allocated to the set of four coloured buttons. Is there a reason for that?
(they do work if keymoved to those buttons) |
Fyi, I am able to program the color buttons with any function on the device layout page on my 422-2 remote. I tried it using my Roku upgrade file and it worked just fine. |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Thu Oct 01, 2015 5:54 pm Post subject: |
|
|
rbautch wrote: | Fyi, I am able to program the color buttons with any function on the device layout page on my 422-2 remote. I tried it using my Roku upgrade file and it worked just fine. | That's interesting.
The link provided an 'Inteset-422-1.rdf' file, without image files,
and my RMIR folder only has images 'INT-422.map' and 'INT-422.jpg'.
I am hoping this might explain it, so do you have a map and jpg specifically for INT-422-1?
If so would you kindly link or upload them? |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Fri Oct 02, 2015 11:39 am Post subject: |
|
|
It's been discovered that the Inteset-422(3494) and Inteset-422-1(3595) have a mistake in the [Checksums] section. The middle line should be
^$200:$20A..$3FF
where the $20A used to be $202.
I've corrected it in the Inteset-422-1.RDF in the RDF Development section. The Inteset-422.RDF in the distribution needs to be corrected. |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Fri Oct 02, 2015 6:38 pm Post subject: |
|
|
.
Thank you binky123
I have renewed with the latest RMIR package and put in the new Inteset-422-1.RDF, and done 981 to the INT-422-2 before uploading a Tv upgrade, but still find that in the device layout page:
functions can't directly be allocated to the set of four coloured buttons (nor, in the illustration, do they have the usual yellow outlines).
rbautch wrote: | Fyi, I am able to program the color buttons with any function on the device layout page on my 422-2 remote. I tried it using my Roku upgrade file and it worked just fine. |
What is wrong please? http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13582 |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Fri Oct 02, 2015 10:37 pm Post subject: |
|
|
binky,
I have modified the 3294 RDF in SourceForge. Is the existing line Code: | AdvCodeAddr=$0029..$01FF | correct? It seems odd to me that the checksum (starts at 20A) would skip the first byte.
I also made the initial check in to SourceForge of the 3265 RDF. |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Fri Oct 02, 2015 11:00 pm Post subject: |
|
|
3FG, thanks for updating SourceForge for the 3494 and 3565 RDFs.
The checksum starting address is correct as it starts at position $0A(it skips the checksum bytes and the signature but includes the setup codes and settings bits). The Advanced Code/KMM area is much farther away at offset $29. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Fri Oct 02, 2015 11:01 pm Post subject: |
|
|
tranx,
The problem was that the button names in the map file were different to the names in the RDF file. Here's a modified map file which works for me. If it works for you, I'll check it in.
BTW, even using the old map file, it is possible to assign the buttons using the Buttons tab rather than the Layout tab. |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Sat Oct 03, 2015 3:26 am Post subject: |
|
|
3FG,
Thanks very much for providing the modified INT-422.map, which does work for our 422-2
I only have that model but take it that the eight extra buttons at the bottom are printed with labels and symbols as follows :-
__TOP ROW____________________________________________
(422-1?): (PIP-On/Off) (PIP-Frs) (PIP-Ch+) (Live)
-----------------------------------------------------
422-2: ........ Star ........ Disc ..... Triangle .... Live
__BOTTOM ROW_________________________________________
(422-1?): (PIP-Swap) (PIP-Move) (PIP-Ch-) (Zoom)
-----------------------------------------------------
422-2: ......Eject ..... Diamond ... Square ... Zoom
For 422-2 at present it is a bit confusing to interpret the titles of those buttons in RMIR, with files according to the button-labels of 422-1.
The naming and numbering of the Inteset files themselves is already tricky but will have a go at modifying those which are working for me, to better suit the 422-2
Last edited by tranx on Sat Oct 03, 2015 9:27 am; edited 1 time in total |
|
Back to top |
|
|
tranx
Joined: 13 May 2012 Posts: 682 Location: Hants, UK |
Posted: Sat Oct 03, 2015 8:33 am Post subject: |
|
|
3FG
I have edited .map, .rdf, and .jpg files to suit INT-422-2
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13584
- they seem to work fine together, but I don't know if 'checksums' or something beyond my ken also needs to be changed!
If they are not faulty, and if you think it is worthwhile to incorporate them for more general use, would you kindly rename them and make whatever other adaptations are needed? |
|
Back to top |
|
|
|