JP1 Remotes

My Sony Bravia LCD works with the remote's internal code 0810, except there is no way to change the input without cycling through the choices.
I used RM with the Sony KDL-4054100 TV.rmdu which has the descrete codes and changed the remote to be the RCRP05B. I set all 9 descrete inputs to the number keys - shifted.
I started with the default protocol "Sony Combo (12/15/20)" and copied the outputs to IR, with and without the "Upgrade protocol code NOT REQUIRED". Went through Sony 12/15, combo 12/20, and 20. In IR, I assigned the new code to Dev4 and to TV. My TV did not respond to any of them. I don't think my remote responds to the Shift-Dev4, maybe that's only available as phantom keys.

I'll download my file and edit this to add link.
Removed file when fixed. Thanks

Are you aware that shifting the number keys is different than shifting other keys? You must press the shift key twice before pressing the number key you want to shift.

No, I did not know that. I did use the shift-# in macros to test and that did not work either. I am assuming the setup key is the shift key.
Thanks for the info.

All your functions codes for TV 1000 are wrong. The second byte on all should not be $00. Most are $80. Some are different values depending on the subdevice. I have no idea what broke your's.

If I were you, I'd just use 1000 for TV instead of mixing 810 and a bunch of key moves. Just assign all your keys in RM, paste in the device, assign 1000 to TV and be done with it. Also, you don't need the tv tuner command. CH+ or CH- does the same thing.

HERE is a file that I've corrected for you to try.

Still takes a double shift for number keys.

It Works! Thank you so much.

I just posted the RM file I made for you using the same download link as above.