JP1 Remotes

Hi,

The attached link is a file with 8 learned signals from a Denon 1707 AV receiver.
There seems to be many different devices numbers. (2,4,4-1,8,12)

Does the Denon Combo offical protocol cover all of these device numbers or do I need to load a different protocol?

https://www.hifi-remote.com/forums/dload ... le_id=7578

Thanks
Mike

You can use Denon Combo from KM or RM for the signals you decoded except the 4.1 (learned on L1) because it uses Denon-K protocol.
Put these into your IR file. I just tested with the Widget and it seems to send the signals matching your learned data.

Upgrade Code 0 = 63 E6 (Cable/0998) DenonK-rick_test2a (RM v1.97)
CD 00 01 D5 B3 FD
End

Upgrade protocol 0 = 00 CD (S3C80) Denon-K (RM v1.97)
45 91 32 8B 12 8F 45 08 08 00 DA 00 C6 00 DA 02
7B 90 C9 06 D0 03 54 E4 05 08 B4 06 08 B4 07 08
20 11 8D 01 46
End

Then in IR make a keymove where
target device is RCVR or wherever you intend to have it,
target key=L1 or wherever you'll want it
SourceDevice=SAT (the buttonless upgrade)
DeviceType=CBL
SetupCode=0998
HexCmd= $77 $37

Thank you.

I will try this weekend

Mike