Page 1 of 1
Need IR code for Samsung DVD-AR650 IR blaster version: PL
Posted: Mon Sep 21, 2009 12:36 pm
by fleebugs
Please help, anyone? Thanks in advance.
Posted: Tue Sep 22, 2009 1:01 am
by alanrichey
There is an RMDU file for that device at
https://www.hifi-remote.com/forums/dload ... le_id=5119
If you can't produce the remote let me know.
Posted: Wed Sep 23, 2009 2:49 pm
by fleebugs
Hey alanrichey, thanks!
Please excuse my dumb question, I am new to these stuffs. So based on your advise, there's a way to convert the RMDU file to a PL bin file? Please assist me with further directions.
Thank you!
Posted: Wed Sep 23, 2009 2:57 pm
by fleebugs
Hi alanrichey, please ignore my last reply (for now)
I found this post in the forum:
https://www.hifi-remote.com/forums/viewtopic.php?p=63821
and I will give it a try tonight.
See I told you I am a newbie.
Posted: Wed Sep 23, 2009 3:05 pm
by alanrichey
You might want to read my Article at
https://www.hifi-remote.com/forums/dload ... le_id=6413
It explains everything
Al
Posted: Thu Sep 24, 2009 10:05 am
by fleebugs
Hey AL,
Thanks for your tips and your article. I successfully created my PL.bin file from the rmdu file. My bin file works like a charm!
Thank you again!
Fred
Posted: Thu Sep 24, 2009 10:24 am
by alanrichey
Well done
Now that you have proven it works I will upload a full package to the public sites. Could you send me a copy of your RMDU file to alan@rmrsoft.com so I know I am using the right version ?
Cheers