Israel YESMaxHD ADB-7820sx Box Code

eleibzon · Post by **eleibzon** » Tue Sep 15, 2009 4:52 pm

Hello All,

Just got a Sling Box Solo in Israel and I'm having problems with setting up the IR codes for the Yes Max HD box which is ADB-7820sx. Does anyone has an experience with it and knows where to get the BIN files for it?

The IR Blaster ver is 4

Thanks.

Eli

Post by **The Robman** » Tue Sep 15, 2009 5:11 pm

Have you tried this already...
https://www.hifi-remote.com/forums/dload ... le_id=4416

or this...
https://www.hifi-remote.com/forums/dload ... le_id=3883

Just a sampling from the file section.

eleibzon · Post by **eleibzon** » Wed Sep 16, 2009 2:56 am

Yes, tried both although they aren't RV.

alanrichey · Post by **alanrichey** » Wed Sep 16, 2009 3:14 am

Hi

I don't think there is much future for you in those 2 boxes. They both use the NEC1 protocol and having loaded the ADB-7820SX onto my Harmony Universal Remote it seems to use the Dreambox protocol. Which is a real pain as this a difficult protocol to get working.

Happy to try though so I suggest we close this thread and continue to discuss it in the thread you have started in the Sling Community.

Al

eleibzon · Post by **eleibzon** » Wed Sep 16, 2009 3:28 am

thanks

george99 · Post by **george99** » Wed Apr 28, 2010 7:33 am

Hi,
I just got Yes Max (SAT Receiver/DVR).
Does anyone know what code I need for the remote for my SLingbox Classic?

The code that I used for the Yes receiver without the DVR doesn't work at all on this. I found several threads, but nothing final.

Those idiots at Echostar decided to shut down Slingcommunity.com, so they could "give us better service" by taking away a great support forum.

Any help is appreciated.

george99 · Post by **george99** » Wed Apr 28, 2010 9:46 am

ANy updates on this. I just got the same receiver (Yes Max) and I need the sling code.

alanrichey · Post by **alanrichey** » Wed Apr 28, 2010 10:02 am

Try this new one

https://www.hifi-remote.com/forums/dload ... le_id=8334

new link:
https://www.hifi-remote.com/forums/dload ... le_id=7441

george99 · Post by **george99** » Wed Apr 28, 2010 8:05 pm

Hi Alan,
Thanks for that, it works!!

My question though is how can I get some of the disabled buttons such as the "exit" button to work?

Also, since echostar closed slingcommunity, is there a way that I can learn how to fully create my own remote for sling?

alanrichey · Post by **alanrichey** » Wed Apr 28, 2010 11:18 pm

Hi

Glad it works. Not much I can do about the Exit button. What I do in these situations is to load the device onto my Harmony Universal Remote and use that to 'mimic' the original remote. In this case the version on the Logitech database does not have the Exit button defined so I can't learn the code.

You can do it yourself using trial and error and it's all covered in my Article, which is now stored at https://www.hifi-remote.com/forums/dload ... le_id=6413

But give me 24 hours and I will update it, as things have changed a bit since I wrote it.

avitanim · Post by **avitanim** » Sun Nov 28, 2010 1:47 pm

hello my friend
i got the yes max total and i have slingbox
i dont have the codes and the ones that you said its work are not here anymore
can you help me whit those codes ?
thanks
you can send them to :
avitanim@gmail.com
thanks again

alanrichey · Post by **alanrichey** » Sun Nov 28, 2010 2:11 pm

Does this one work

https://www.hifi-remote.com/forums/dload ... le_id=7441

avitanim · Post by **avitanim** » Mon Nov 29, 2010 1:15 pm

no its not work for me

alanrichey · Post by **alanrichey** » Mon Nov 29, 2010 1:39 pm

Can you confirm the manufacturer and model number of your device

Post by **The Robman** » Mon Nov 29, 2010 1:40 pm

the readme file wrote:If you have problems do NOT just report that it 'doesn't work', that is totally useless for someone trying to understand what is going on. So report the following:

1. Was there any error message after you typed in the Code (and Tapped the Power button in V2.0) ?

2. Did you give the Power command plenty of time to react ? (I have a DVR that takes about 6-8 seconds to power up/down)

3. After completing the setup (regardless of whether the Power button worked) do any of the other buttons work ?

4. Have you used a Digital Camera to confirm the IR Blaster is actually firing when you tap the Power button ?

5. Have you experimented with the placement of the IR Blaster ?

JP1 Remotes