Page 1 of 1
RemoteMaster will not import BIN files
Posted: Sat Aug 29, 2009 7:00 pm
by alanrichey
I am trying to import the BIN files from
https://www.hifi-remote.com/forums/dload ... le_id=3771 but nothing appears in RemoteMaster.
Am I doing something wrong ?
Posted: Sat Aug 29, 2009 7:27 pm
by vickyg2003
Alan, is this for the Echostar Pal box for over the air digital reception? If so perhaps you can start from the Echostar Pal KM upgrade.
Posted: Sat Aug 29, 2009 7:59 pm
by alanrichey
I'm not sure. This was the thread, where I suggested the user check out all the various Sky Italy upgrade files and he told me that this was the file that worked but it only had a few buttons defined. I was hoping to recreate the RM file so I could add some buttons.
http://www.slingcommunity.com/forum/thr ... -Decoder./
Al
Posted: Sat Aug 29, 2009 9:02 pm
by vickyg2003
Okay, not the Echostar Pal. UEI has three official upgrades for Sky Italia, but from what I've seen of the Pal boxes, its probably the one that uses the dreambox/moxi protocol.
I couldn't open those bin files either, I'd suggest you try this one
https://www.hifi-remote.com/forums/dload ... le_id=3769
Although this one the fixed data is 14,0F,44,31, but the official CBL/1693 has 10 0f 44 31 for the fixed data.
Posted: Sun Aug 30, 2009 6:24 am
by The Robman
Here's the original upgrade that I used to create that bin file...
https://www.hifi-remote.com/forums/dload ... le_id=3769
And here's the thread where it was discussed...
https://www.hifi-remote.com/forums/viewtopic.php?t=7187