JP1 Remotes

If I were to use an extender in Comcast1067Bx3, I might need this long duration protocol for JVC DVD. Can someone help convert from S3C8 to S3F8? The fourth byte from the end (05 here) is repeats.

Upgrade protocol 0 = 01 34 (S3C8+) PB v3.11
42 8D 11 8B 14 85 59 08 08 01 06 00 F2 01 06 02
FF 2E 24 10 68 08 20 FF 05 8D 01 46
End

This extra info is from the KM setup sheet for manual settings
Protocol ID: 01 34
Fixed Data: 08
Manual Settings
PID: 01 34
2nd Cmd Byte: None
Signal Style: LSB-COMP
Bits/Dev: 8
Bits/Cmd: 8
Using 3rd-Party Protocol Code and PID from Line Notes
(see [Protocol Help] for details)

I'm not sure if to try it in PB.

My understanding is that S3C8+ and S3F8 protocols are identical. See this quote

mr_d_p_gumby wrote:Note that there are some differences between the IR engines (and their respective data structures) in the different processors. Each newer generation has added new capabilities. From oldest to newest, the versions would be:
6805C9
P8/740
6805RC16/18
S3C8/S3C8+
HCS08

The S3F8 IR engine is identical to the S3C8+, and does not include the newer features that were added to the HCS08 engine.

PB only knows what we know about the IR engine. I would estimate our knowledge of it's operation to be about 20-25% of it's total capabilities.

from this thread.
_________________
Graham