JP1 Remotes

I brough my Slingbox back to Europe so i can watch my German channels over in the U.S. , everything works fine, picture, sound etc. but i cant control the box, i have tried all the Codes in the Slingbox menu but nothing works, not even power on/off.

If anyone has an idea how to fix it so i can at least control on/off and switch channels up/down i would really appreciate.

Maybe someone knows how its coded, or maybe there is a way to read the codes through Infrared from my computer send by the original remote ?

I tried to see if that box is a clone from another supported brand but

I would even sit down and go through all numbers if needed as long as it takes.

Thanks in advance !

1. Device: X-Cruiser XDSR200
2. Type of device: Sat Receiver
3. Year: 2004
4. JP1/UEI Remote model: N/A
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? ?

slingboxer173 wrote:1. Device: X-Cruiser XDSR200
4. JP1/UEI Remote model: Slingbox

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10337
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10338
• BIN files: https://www.hifi-remote.com/forums/dload ... e_id=10339

BIN file Instructions.

• Mac: http://support.slingbox.com/get/KB-1000223.html
• PC: http://support.slingbox.com/get/KB-1000218.html

Customization instructions:

• http://slingbox.wikia.com/wiki/How_to_c ... te_upgrade