JP1 Remotes

Posted: **Mon Jul 20, 2009 1:09 pm**

Hi guys,

I'm trying to create an upgrade for my cable box (Thomson DCI) and when I read the IR codes through IR widget I always get a 0 in the Hex field.

I get device and subdevice, and the the diferent commands create different X values. 32 33 34 35 36 .....

I have been through the forum all afternoon and I can see that a variation of the nokia32 protocol was created to handle some different X values for a Freebox HD.https://www.hifi-remote.com/forums/viewt ... 37&start=0

In that solution the bottom nibble of the OBC code controls the X value. But that will only allow values from 0 til 15, right?

Is it possible for one of the gurus to create a similar update in the protocol to allow values up to 255?

Posted: **Wed Jul 22, 2009 12:07 pm**

Binky123 updated the protocol and now I got it working

[Nokia32 Hacked for Thomson/RCA DCI-7000 X value from Hex; Hex always 0]
PID=01 72
DevParms=Device,Sub Device,X,High X-bit:Constant|Toggle|Release
DeviceTranslator=Translator(3,8,0) Translator(0,8,8) Translator(1,8,16) Translator(2,8,24)
FixedData=00 00 00 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 41 8B 15 00 00 54 00 77 00 54 00 CA 00 54 01 1D 00 54 01 71 00 D0 00 77 E4 07 06 B0 07 FF FF FF FF A6 0D 02 EB 03 E6 0D 12 76 03 01 6B 08 76 00 01 6B 03 B6 06 80 F6 FF 5F 6C 09 F6 01 0A FB 0B C6 F8 13 88 F6 01 58 6A F2 8B EB 76 03 02 EB 01 AF C6 F8 13 88 F6 01 58 6A F7 46 06 80 1C 22 F6 01 4C B0 C4 87 34 04 F6 FF 75 4E 37 44 F6 1C 12 8D 01 4C 5C 04 90 C3 90 C3 08 C3 56 C0 03 86 04 C0 06 C1 12 F6 01 4C 5A EC AF

Posted: **Sun Jul 26, 2009 6:38 am**

Can you just confirm how you use this protocol ? I had the same situation using IRScope where the OBC/Hex was always zero and the X-value changed. What do you put against the OBC/Hex values for the each function.

JP1 Remotes

Nokia32 with empty hexadecimal values

Nokia32 with empty hexadecimal values

Solved