JP1 Remotes

[blood2009]

Hi
I have big problim when i'm try use IR 800 Software to upluad the configurtion in my urc-39930RJ0 v4 he give this error "Device io control failed in C2Rad" so please help ,and my OS is winxp sp2 and my cable is JP1.2 USB DELCOM

[mdavej]

AFAIK, JP1.2 cables don't use the Delcom driver. Only JP1 cables do. So you may have the wrong cable for your remote. Do you have a DIY Gadget cable or a Tommy Tyler cable? Tommy's JP1.2 cable uses THIS driver. Is this the first time you've tried to use your cable with this remote? If not, did it work with an older version of IR? Also, are you sure the message isn't I2CRead instead of C2Rad?

[blood2009]

Thanks for help
i have DIY gadet cable you can go to this link http://www.diygadget.com/store/jp1/jp1-x-for-remote-controls/jp1-eeprom-usb-cable/prod_8.html if you want to see it, and this is the 1st time I'm using the software IR v8 and v7.14
thx best regard

[blood2009]

Sorry the error is DeviceIo Control failed in I2CRead I'm so sorry it's 1st time use this software

[The Robman]

You're trying to use a JP1 (EEPROM) cable to read a JP1 (Flash) remote. You have the wrong cable.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

[blood2009]

so what's the correct cable can you help? do you men i should use RS232 cable ?

[Capn Trips]

You need to read this thread first to determine which cable you need.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)