JP1 Remotes

1. Device: Panasonic PT-AX200u
2. Type of device: High Definition TV Projector
3. Year: 2008
4. JP1/UEI Remote model: Comcast URC 1067
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? N/A

JP1 File section has Device 25 – TV – Panasonic PT-AE900.txt This is setup for a different projector and remote. I changed the remote to the Comcast URC1067 in RM v1.93 and uploaded it into the remote with ir v8. It will setup in this remote as a TV device, but does not work with the projector.

Pronto file section has Panasonic projection ir codes at: http://www.remotecentral.com/cgi-bin/co ... projector/
I don’t understand how to use these in the JP1 software.

Suggestions on being able to turn this projector at least on and off with this remote are appreciated.

The link you did post is shows Pronto Long form Hex. John Fine has provided a tool to decode these. You need to download

IRTool
DecodeIR.Dll

Put these files in the same directory.

Start IRTool
Copy a code from the Remote Central Page
Paste in the "Hex Codes" box in IRTool
Press the Decode Button

And you'll be able to see the decoded information.



I had a heck of a time finding Device 25 – TV – Panasonic PT-AE900.txt. Are you talking about one file you found in the Projector folder?. If so I'd also check the other 5 Panasonic projector files AND try all the built in Panasonic TV codes for your remote if the decodes that you found don't do the job.

BTW: Which Comcast remote do you have? There are two Comcast 1067's.

I added a link to the file in the first post.

Hi all,

Thanks a bunch for your help. I got the Comcast DVR URC-1067Bx3 working with the projector using the Panasonic Projector (master) file. It will not only go on and off, but will access and make selections on the main menu and the favorite setup menu.

The ir and rm software are excellent. Thanks again.

Bill