Rm-Cant get results

swar · Post by **swar** » Wed May 20, 2009 10:12 pm

The Robman
Ive been strugling with this process for a year. Im STUCK .I want to control my home components with a slingbox. And then hopefully remap the buttons to be more conveniently located on the sling-remote.So far, all i have been able to accomplish with rm, is mere converting available upgrade files to a format the slingbox can use (i.e. .bin), but my rm modifications to them don't work.
example: I import a device upgrade file into rm. Say f.i. "Sony triple megachanger" which somebody posted as Triple changer.rmdu and i set the remote for slingbox. in rm, i go to "layout" tab and try to reassign available functions to different buttons. THen i export binary .bin file to slingbox "sbav" directory. Then use its file name in slingbox settings as the "custom code" for the dvd remote. Q: Ok, then the slinbox remote ends up with the original "upgrade" settings, but not with the new assignments i have made. And certain buttons on the ultimate sling remote remain greyed out no matter what i try to assign in layout of rm, and export as sbav/*.bin. And any "custom" buttons are still only available in slingbox by using dropdown/custom8, etc..??
Please help

Post by **The Robman** » Thu May 21, 2009 6:19 am

Step 1: figure out what type of files your Slingbox uses (ie, PL, RV, etc). You can verify your IR blaster version in the Slingbox Properties dialog.

1=JU
2=PL
3=PK
4=RV
5=PL (Slingbox Pro-HD)

If you're not creating the right type of upgrades, the Slingbox won't recognize them. If in doubt, create both PL and RV files.

Step 2: when you create the upgrade file, use a new setup code number for it, such as SAT/2000 (which would create S2000_PL.bin). Then save this in the SBAV folder.

Step 3: when you go back into SlingPlayer to load the new upgrade, select "other" and enter the S2000 code.

I can't tell from your description above if you've done any of those steps, and it sounds like you're continuing to use the built in code rather than the upgrade.

swar · Post by **swar** » Thu May 21, 2009 1:29 pm

Yes i have. And im pretty sure its not the built in code because more custom functions become available. But not the new button assignments.
Thanks for your prompt reply.

Post by **The Robman** » Thu May 21, 2009 2:04 pm

Then all I can suggest is that you load up a copy of your RM file, with the Slingbox assigned and the buttons laid out as you want them, then post a link to the file here.

Also mention which buttons that you programmed are not showing up.

swar · Post by **swar** » Thu May 21, 2009 3:52 pm

i will post an example asap. Also, if i can get that far.., Another question:The slingbox software supports keystrokes that seem to be pre-defined. I.e. the keystroke "p" defaults to activating the "play" button. And cursor up on the pc activates cursor up on sling-ap. Is there a way to change these?

Post by **The Robman** » Thu May 21, 2009 3:55 pm

swar wrote:The slingbox software supports keystrokes that seem to be pre-defined. I.e. the keystroke "p" defaults to activating the "play" button. And cursor up on the pc activates cursor up on sling-ap. Is there a way to change these?

I have no idea, but I doubt it.

swar · Post by **swar** » Thu May 21, 2009 4:06 pm

thanks. How do i "load up a copy of your RM file"?

Post by **The Robman** » Thu May 21, 2009 6:26 pm

1. Click on the file section link at the top of the page.
2. Click on the Diagnosis Area folder
3. Click on the Upload link
4. Enter the details and select your file.

then...

5. Click on the file section link again
6. Your new file should appear as the newest file in that folder, then cut & paste the URL for the file here.

swar · Post by **swar** » Thu May 21, 2009 10:01 pm

thanks

alanrichey · Post by **alanrichey** » Fri May 22, 2009 2:44 am

You might also want to read my article at:
https://www.hifi-remote.com/forums/dload ... le_id=6413

swar · Post by **swar** » Tue Jun 09, 2009 9:20 am

I have kiwins "PanasonicDMRJ-0[1].9" file in my slingbox remote. Right now it works with my panasonic dvr.But I have a second panasonic dvr set to "2" on the unit, and "1" on the one that is working with this upgrade. How can I control both. Is it possible? Or, what parameter determines whether a button should control the unit set to "1" or "2"? And what is the terminology for this? Or, how can i change the buttons in rm to control unit "2" instead of "1".
Thanks.

Post by **The Robman** » Tue Jun 09, 2009 9:39 am

swar wrote:I have kiwins "PanasonicDMRJ-0[1].9" file in my slingbox remote.

Rather than ask us to try searching for that file and ask you to confirm if we've found the right one, all of which takes time, could you instead just post a link to the file in question.

swar · Post by **swar** » Wed Jun 10, 2009 10:15 am

This is the link to the file.
https://www.hifi-remote.com/forums/dload ... le_id=4411

swar · Post by **swar** » Thu Jun 11, 2009 4:03 pm

Ive posted the link to the upgrade file. But my question is more general.If you have 2 identical units.And the manufacturer (panasaonic in this case) has you identify them by button press (on the physical remote) by #1 and #2, what setting does this difference appear as in jp1 terminology? Or, how can i change from #1 to #2 w/ settings in rm?

Post by **The Robman** » Thu Jun 11, 2009 4:53 pm

Normally, to answer that question, we would learn samples from the remote when it was in "#1" mode and then again when it was in "#2" mode and we would compare the signals to see what changed.

If the device code changed between the two, we would adjust the device code. If the sub-device code changes, we would adjust that. Etc.

JP1 Remotes

Rm-Cant get results

Rm-Cant get results

keystrokes

Re: keystrokes

Controling 2 identical devices

Re: Controling 2 identical devices

Please Help