View previous topic :: View next topic |
Author |
Message |
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Sun Feb 01, 2009 10:38 am Post subject: Shift key not working? |
|
|
I cannot get the shift key to work on my Atlas OCAP URC-1056.
I'm using remote master.I have assigned the keys and everything but if I press the shift key + 1 it does not work.
Any ideas?
Here is a screenshot of remote master:
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21210 Location: Chicago, IL |
Posted: Sun Feb 01, 2009 10:40 am Post subject: |
|
|
You need to press SETUP *twice* before it will work with shifted numeric buttons. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Sun Feb 01, 2009 12:41 pm Post subject: |
|
|
I don't get it... I press set-up twice on the remote and then shift + 1 at the same time on the remote? Well I did that and nothing happen. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4500
|
Posted: Sun Feb 01, 2009 1:05 pm Post subject: |
|
|
Press shift shift 1 to execute the function you've programmed on shift 1. When the remote sees one shift followed by a number, it thinks you're entering a code. Two shifts gets around this behavior. |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Sun Feb 01, 2009 1:14 pm Post subject: |
|
|
Still not working with shift shift 1.
Am I missing something in my settings? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Feb 01, 2009 1:17 pm Post subject: |
|
|
Quote: | I press set-up twice on the remote and then shift + 1 at the same time on the remote? Well I did that and nothing happen |
Carl, is one of your keys labeled shift? In the JP1 world SETUP is what we are refering to as your shift key. Setup, setup, 1 = Shift 1 don't press any keys at the same time! |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sun Feb 01, 2009 1:19 pm Post subject: |
|
|
Are you using the button labeled SHIFT? The shift button is actually the SETUP button. _________________ Mark |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Sun Feb 01, 2009 1:26 pm Post subject: |
|
|
Well there is a shift label above the star key.
Here is the key I use:
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Feb 01, 2009 1:42 pm Post subject: |
|
|
Well that is why you are not getting results. Press Setup,setup,1 the SHIFT label that is on your Atlas is refering to some function of your equipment, not a JP1 shift. |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Sun Feb 01, 2009 1:45 pm Post subject: |
|
|
I have tried the set-up button at the top left corner and still no results. |
|
Back to top |
|
|
greenough1
Joined: 30 Jan 2005 Posts: 659
|
Posted: Sun Feb 01, 2009 2:10 pm Post subject: |
|
|
Please upload your IR file to the diagnostic area AND post a link back here to it. Best,
jeff |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
|
Back to top |
|
|
greenough1
Joined: 30 Jan 2005 Posts: 659
|
Posted: Sun Feb 01, 2009 4:02 pm Post subject: |
|
|
While this isn't completely helpful to you, I note odd behavior with shift(s) and a numeral key for DVD. I did a test with a "virgin 3033 JP1.3 Atlas" download, and put a keymove on shift+1. It behaves differently than yours does.
Yours, after some number of key presses, testing the shift 1, 2, or 3, will light the DVD key for about 2-3 times as long as a single keypress should light it. I also note that you've stripped out many of the "built-in" setups.
These atlas remotes are sensitive to unknown setups, or if too many of the built-in ones are deleted and will behave unpredictable.
As a test, add in your devices to this virgin 3033 JP1.3 Atlas setup HERE . And add the keymoves shift+1, etc. into it and see if it behaves better. Note that you may need to turn off the Setup code locks on the right panel of the General tab/page.
Report back how that goes.
jeff |
|
Back to top |
|
|
Carl
Joined: 15 Jan 2009 Posts: 159 Location: Quebec city, Canada |
Posted: Sun Feb 01, 2009 5:44 pm Post subject: |
|
|
Well I did what you suggested and unfortunately it still not working.
I'll keep looking. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Feb 01, 2009 6:31 pm Post subject: |
|
|
So pressing the above keys does not do what you want,
It could be that the function doesn't work on your equipment. Did you try the code on another non-shifted key to make sure its operates your equipment? |
|
Back to top |
|
|
|