View previous topic :: View next topic |
Author |
Message |
BrianT
Joined: 12 Jan 2004 Posts: 2
|
Posted: Mon Jan 12, 2004 7:08 pm Post subject: ExpressVu 6000 & 5100 Descrete Codes |
|
|
Hi,
I have a RCA RCU810, programed my BEV 6000 (device 1) to 0775 and my BEV 5100 (device 3) to 1775 all working fine other that I can not get descrete ON - Off codes to work I have tried.
Discrete Power ON at EFC=242_ OFF at EFC174 (for device 1)
Discrete Power ON at EFC=234_ OFF at EFC166 (for device 3)
I found these codes on a search on JP1, using KM 7.48 to program.
Thanks BrianT. |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Mon Jan 12, 2004 11:21 pm Post subject: |
|
|
Have you confirmed that others have had success with discrete power commands with the same models. IIRC, Dish has gradually rolled out the software to add discrete commands and the Canadian units at least at one time didn't respond. _________________ -Jon |
|
Back to top |
|
|
BrianT
Joined: 12 Jan 2004 Posts: 2
|
Posted: Tue Jan 13, 2004 8:25 am Post subject: |
|
|
Jon,
No I have not managed to confirm, if any body else has managed to get descrete ON/Off working on BEV units, thats one of things I would like to know, or am I just hoping.
Chow BrianT. |
|
Back to top |
|
|
|