JP1 Remotes

mq109 · Joined: 21 Jan 2009 Posts: 13 Location: Portugal

I have a slingbox pro, how can I do to work's witch ir on my scientic atlant kmm3000 Wink

Thank you for my attention.

The Robman · Posted: Fri Jan 30, 2009 7:33 pm Post subject:

We haven't seen the Scientific Atlanta KMM3000 here yet, so we don't have the codes. I did a Google search and found a post over in the Sling community where someone has captured the codes, so hopefully they will post the info over here.

http://www.slingcommunity.com/forum/thread/32957/Scientific-Atlanta-KMM3000-TM-codes/
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

mq109 · Joined: 21 Jan 2009 Posts: 13 Location: Portugal

Robman, thank's for your information.
See you Very Happy

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

That would be me Smile

Unfortunately I am a bit of a novice at this, and when none of the codes were recognised by IR.EXE as a specific Protocol and device I gave up. If an expert wants me to try anything else please let me know.

Later: For Robman. Just saw your post on the Sling Community forum. Happy to help. I have the SA 3000 installed on my Harmony Remote control and I have a JP1 URC 8910 and IR.EXE

What do you need ?

Al

The Robman · Posted: Sat Jan 31, 2009 9:50 am Post subject:

Hi Al, thanks for coming over here. Could you learn the signals from the Harmony using your URC-8910, then verify that the learns on the 8910 actually work. Then download the memory using your JP1 cable and save the IR file. (If the memory fills up, after you've downloaded, delete all the learned signals and learn the rest of the buttons and save a 2nd file).

Then, load your IR file(s) into the Diagnosis Area:
http://www.hifi-remote.com/forums/dload.php?action=category&cat_id=35

and post a link to them here, then I'll do the rest.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

Hi Rob

I can't verify the codes as I don't have access to the box, all I can do is learn them from the Harmony. And this is going to take some time as the remote fills up after about 6 codes. And to my untutored eye it looks like rubbish Smile

And there are warnings about more than 3 burst codes ?

I have uploaded the first file with codes for Power, Menu, Guide and the navigation keys at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6188

Can you take a quick look and see if it is feasible ? if so I will do to the rest of the codes.

Al

The Robman · Posted: Sat Jan 31, 2009 11:46 am Post subject:

Yup, those are good enough for me to construct an upgrade from, so please continue. (Could you re-learn the LEFT button please).

What learning technique are you using? Are you holding the Harmony button down until the 8910 reads SUCCESS? If you're not, try it that way. If you are, try using short presses of the Harmony remote instead.

When you hold the harmony button down, the complete signal repeats, which normally causes the 8910 to learn just one copy and flag it as repeating (which is good) but in this case you're actually storing multiple copies of the data. This could be caused by you releasing the Harmony button too soon, or maybe the Harmony itself stops sending.

A short press of the Harmony button will hopefully cause just one repeat to be stored by the 8910 which would let you store more buttons in each cycle.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

vickyg2003 · Posted: Sat Jan 31, 2009 12:17 pm Post subject:

Rob,

What does "Phase Encoded (RC Type)" mean?

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

The Robman · Posted: Sat Jan 31, 2009 12:54 pm Post subject:

They're all good except for two, could you re-learn 4 and Replay. Thanks.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

The Robman · Posted: Sat Jan 31, 2009 1:15 pm Post subject:

The 4 learn still isn't good enough, could you try learning it several times so there's a better chance of there being at least one good sample.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

alanrichey · Expert Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA

File is at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6192

ALL the numbers keys are learned as "4", hopefully one is OK Smile

Al

The Robman · Posted: Sat Jan 31, 2009 3:03 pm Post subject:

Thanks Al, I got them all now.

MG, here's a PL Slingbox upgrade for you to try...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6191
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

mq109 · Joined: 21 Jan 2009 Posts: 13 Location: Portugal

Robman, today I testing your C2000_PL.bin, but it didn't work, it was feather.. Crying or Very sad