I bought a RS 15-135. Apparently it has dedicated HDTV keys (PIP and HDTV inputs). If I am controlling DVR functions with the remote, and want to use one of these "dedicated" HDTV keys I have to hit the TV key before using the "dedicated" key, then hit the DVR key after. I wish these "dedicated" keys worked like the volume lock. I tried using the Learning function to teach the remote to send HDTV commands with these keys, when the remote was in the DVR mode, but it would not transmit.
I would appreciate advise on whether or not it is possible to get these keys to transmit HDTV commands when the remote is in the DVR mode.
Thanks,
David
want user friendly dedicated keys
Moderator: Moderators
I assume you don't have a JP1.x cable. You can copy that key from TV mode to the same key in DVR mode. To use, for example the HDMI button in DVR mode, do the following.
- Press and hold P for 2 blinks
- Press 9 9 4
- Press TV, then HDMI
- Press DVR, then HDMI (2 blinks)
Now the HDMI key from TV mode has been copied to the HDMI key in DVR mode.
HERE'S a list of advanced manual programming instructions which aren't in the manual.
EDIT: Edmund almost beat me to it. Either method will work fine.
- Press and hold P for 2 blinks
- Press 9 9 4
- Press TV, then HDMI
- Press DVR, then HDMI (2 blinks)
Now the HDMI key from TV mode has been copied to the HDMI key in DVR mode.
HERE'S a list of advanced manual programming instructions which aren't in the manual.
EDIT: Edmund almost beat me to it. Either method will work fine.
Last edited by mdavej on Sun Jan 04, 2009 8:41 pm, edited 1 time in total.
Re: want user friendly dedicated keys
try the following:davee wrote:I bought a RS 15-135. Apparently it has dedicated HDTV keys (PIP and HDTV inputs). If I am controlling DVR functions with the remote, and want to use one of these "dedicated" HDTV keys I have to hit the TV key before using the "dedicated" key, then hit the DVR key after. I wish these "dedicated" keys worked like the volume lock. I tried using the Learning function to teach the remote to send HDTV commands with these keys, when the remote was in the DVR mode, but it would not transmit.
I would appreciate advise on whether or not it is possible to get these keys to transmit HDTV commands when the remote is in the DVR mode.
Thanks,
David
1. tv
2. press and hold P for two blinks
3. enter 9 9 4
4. press PIP key
5. DVR device key
6. press PIP key
repeat for the other command.
Edmund