View previous topic :: View next topic |
Author |
Message |
gah650
Joined: 26 Dec 2008 Posts: 4
|
Posted: Fri Dec 26, 2008 10:13 am Post subject: Looking for discrete codes for Samsung LN32A650 tv |
|
|
Hello,
I hope this is an appropriate question for this thread.
I'm trying to find/program the discrete codes for the Radio Shack 15-100.
I want to be able to use a macro that would change the hdmi inputs on my samsung tv.
is there a way to do this without having to add any external components to the remote; i.e. can it be programmed using the remote itself without connecting to a computer?
Thanks,
George |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Fri Dec 26, 2008 11:33 am Post subject: |
|
|
Try downloading any Samsung TV upgrades that we have in the file section and see if discrete input codes are included. If you find such a file, post a link to it and I'll tell you if there's a similar code in your 15-100. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gah650
Joined: 26 Dec 2008 Posts: 4
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
|
Back to top |
|
|
gah650
Joined: 26 Dec 2008 Posts: 4
|
Posted: Sat Dec 27, 2008 3:25 pm Post subject: |
|
|
OK - sorry for the confusion.
Here's the file I found for my tv:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6022
I also did find that you can test codes on the 15-100 by pressing the mode button, then the "p" button (don't hold, just press), then pressing a 5 digit code (add two zeroes to the three digits below).
I've found a few that work:
061 component 2
067 source input
083 AV2 input
188 AV1 input
192 S-Video 1 input
204 16:9 aspect ratio
253 Off
I suppose I can go through all of them to test, but I have to believe there's a list somewhere. Then I have to figure out how to program the keys.
thanks again.
George[/list] |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Sat Dec 27, 2008 3:37 pm Post subject: |
|
|
To program these codes permanently, follow the instructions for KEYMOVER, however instead of selecting a "FROM KEY", press P and then type in the 5 digit code.
If there are additional discretes that you want, but are not included in that file, you can look in some of the other files too, just verify that they use the NECx2 protocol with a device code of 7 and a sub-device code of 7 (the sub-device may be left blank). _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4523
|
Posted: Sat Dec 27, 2008 4:04 pm Post subject: |
|
|
The complete list is the file you found. You need to install Remote Master (RM) from the the Tools section as well as the RDF's, Maps and Images to view it. You'll find the following discrete codes in that file.
Code: | select HDMI 1 081
select HDMI 2 030
select HDMI 3 175
select component 1 190
select component 2 061
select PC 073
select AV 1 192
select AV 2 080
DiscreteOn 001
DiscreteOff 253 |
|
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Sat Dec 27, 2008 10:55 pm Post subject: |
|
|
Code: | AV1 00188
AV2 00083
Component1 00190
Component2 00061
SVideo1 00192
SVideo2 00080
PC 00073
HDMI1 00081
HDMI2 00030
HDMI3/DVI 00175
Tuner 00251 |
_________________ Mike England |
|
Back to top |
|
|
gah650
Joined: 26 Dec 2008 Posts: 4
|
Posted: Sun Dec 28, 2008 1:58 pm Post subject: |
|
|
thank you so much.
I finally got it. Had to do a work around, because the key mover just wasn't taking. So - in case there's anyone else in my position - here's how I got it to work.
1. Learn the samsung source button to the tv/vcr button on the 15-100 in TV mode
2. erase the macro on the m1 key
3. program the macro on the m1 in the following order:
a. select tv mode
b. press tv/vcr (which, as above is now the "source" button from the samsung remote).
c. press tv mode twice
d. press p
e. enter the discrete code for the hdmi input needed (00081 for hdmi 1, etc).
f. press the mode key you want to control for the selected hdmi input (for me, hdmi 1 = cbl; hdmi 2 = dvd; hdm1i 3 = apple tv).
the key to getting it to work for me was adding in step 3b (i.e. advancing the source). I'm not sure why this works, but the tv doesn't seem to recognize the discrete codes unless the source is changed first.
certainly, there's a more elegant way to do this using key mover, and avoiding the source button, but - as i said - i couldn't get it to take after several hours of trying. so...this will have to do.
again, thank you so much for the assistance.
George |
|
Back to top |
|
|
|