JP1 Remotes

After applying my upgrades the activities buttons all work. There is some odd behavior though. In the upgrades i applied 1 different function to each of the three activity buttons. That works as it should it sends the function when pressed. It also flashes itself and the currently selected device. All the other buttons on the remote work as expected EXCEPT the red POWER button located in the upper right corner of the remote. Until a device button is pressed again the power button doesn't send ir. It works normally after any device button is pressed.

I left the default activities settings in rmir alone. The power button is in each of the device upgrades, all 8 devices have an upgrade. Anyone have an idea?

Second question how would i turn off activities on the 3680, from rmir? Is there a way to modify the activities settings or the segments to disable activities? If so can i restore it by uploading the old/saved .rmir or a setup 980 on the remote.

Thanks for any help!

I've always had the same issue with power. Don't know how to get around it besides disabling them.

Here's how to disable activities:
http://www.hifi-remote.com/forums/viewt ... p?t=103263

Thanks for pointing me in right direction, disable activites in advanced solved the power button problem.