Y.D.F 7PORT HDMI SWITCH learns protocol = None

[jeajea]

Y.D.F 7PORT HDMI SWITCH learns protocol = None
Tried both a URC3660 and a RCRP05B remote.
Tried download with RM 3015 and RM214.
All learns show protocol **None**.
When a learned button is pushed the remote sends something but the switch doesn?t respond.

http://www.hifi-remote.com/forums/dload ... e_id=26934

[The Robman]

I bet none of these learns actually work, right?

This looks like you are only capturing the repeating portion of an NEC1 signal, you are not capturing the part with the data codes in it. The reason for this is you started pressing the HDMI switch button before you press the URC-3660 button being programmed.

http://www.hifi-remote.com/wiki/index.p ... _Procedure

[jeajea]

Thanks
3660 button first fixed the problem.
it's been a while since I needed to learn a remote

[The Robman]

Glad it worked, please don't forget to load your upgrade

[The Robman]

@jeajea, did you load an upgrade for the Y.D.F 7PORT HDMI SWITCH ?

[jeajea]

I accidentally uploaded it twtce

http://www.hifi-remote.com/forums/dload ... e_id=27047

Note: I returned the switch because it didn't work with my new LG TV

[The Robman]

Thanks Jim, I deleted the 2nd copy.

Also, just for future reference, you should be careful with the RM automatically generated upgrades, you should check that it's taking the best option. In this case, all of your learns used NEC1, device code 128, but for some reason, RM selected NEC1 4Dev Combo.

I have re-build the upgrade using the simple NEC1 executor.