View previous topic :: View next topic |
Author |
Message |
mitten58
Joined: 23 Nov 2008 Posts: 34
|
Posted: Sun Nov 23, 2008 4:33 pm Post subject: IR doesn't recognize WOW 4-device cable remote |
|
|
I am trying to use a cable remote that looks just like an Atlas 4-device cable remote, except the my remote has a WOW cable logo at the bottom.
But IR does not recognize it.
Do I need a new RDF?
Thank you.
**********************************************
P.S: More information:
The sticker in the battery compartment shows "URC-4AXXXB03 A041701".
The EEPROM is labelled a 65P542R, which I believe makes this a JP1.1 remote.
My discrete-device serial JP1.x cable communicates with the device. I get the "double blink" after downloading. The serial cable passed the IR "check interface" test.
After initializing the remote and downloading, memory locations 02F5 through 03F3 were all 00's, whereas in the Atlas 4-Device, RDF, these are all FF's. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Nov 23, 2008 4:59 pm Post subject: |
|
|
If you are able to download the remote, even if IR doesn't recognize it, activate the Raw Download button and then perform a raw download, then post the file as this will help people start a raw RDF for you.
Just FYI, JP1.x remotes are flash remotes and therefore do not have EEPROM chips. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sun Nov 23, 2008 8:33 pm Post subject: |
|
|
The Robman wrote: | If you are able to download the remote, even if IR doesn't recognize it, activate the Raw Download button and then perform a raw download, then post the file as this will help people start a raw RDF for you.
Just FYI, JP1.x remotes are flash remotes and therefore do not have EEPROM chips. | To clarify, in IR, go to "Advanced>Enable Raw Download" and a new button will appear on you General Tab, and after you download, you can read the remote's signature on the Raw Data page (on the right, under the Undo and Apply buttons) _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
mitten58
Joined: 23 Nov 2008 Posts: 34
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sun Nov 23, 2008 11:18 pm Post subject: |
|
|
That signature alone confirms that you were right about it being JP1.1 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Sat Nov 29, 2008 11:19 am Post subject: |
|
|
I've uploaded an RDF for the Altas XL URC-1047C CS400102 here. It still needs some work in the Buttons section to fill in the rest of the keycodes. |
|
Back to top |
|
|
mitten58
Joined: 23 Nov 2008 Posts: 34
|
Posted: Sat Nov 29, 2008 11:18 pm Post subject: |
|
|
Thank you very much.
Now Ir recognizes the remote.
Is there anything I can do to help "fill in the rest of the keycodes"? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Sat Nov 29, 2008 11:49 pm Post subject: |
|
|
Yes, create macros using all of the buttons and then see how they display in IR. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mitten58
Joined: 23 Nov 2008 Posts: 34
|
Posted: Wed Dec 03, 2008 10:13 am Post subject: |
|
|
I've run into a roadblock. I'll have to reset the remote, try some raw data dumps and report back.
***********************************************************
The first macro I entered was for the keys 0-9, and IR recognized them. IR also recognized the macro key as KEY 34 (hex 22).
Then I tried another macro with cable-specific keys like the A, B, C, keys.
IR interpreted the change as a keymove on the TV button.
And I started getting intermittent error messages: "DEVICE TYPE 15 4095 IS NOT CURRENTLY ASSIGNED TO A DEVICE BUTTON." |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Wed Dec 03, 2008 10:33 am Post subject: |
|
|
Those sort of messages happen when the RDF is wrong, so it's not a problem with your remote. If you haven't done so already, enable the Raw Download button (from the Advanced menu) and use that to bypass the RDF when you download. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Wed Dec 03, 2008 12:09 pm Post subject: |
|
|
Thanks. I've updated the RDF to include Macro=$22 in the [Buttons] section. Macro could be a Favorites key. You'll have to check the manual on that though. |
|
Back to top |
|
|
mitten58
Joined: 23 Nov 2008 Posts: 34
|
Posted: Wed Dec 03, 2008 8:34 pm Post subject: |
|
|
Here's the results from raw downloads.
The codes appear to be almost 1:1 for the RDF that you created.
Key Button Label
01 TV
02 SETUP
03 POWER
04 VOL +
05 VOL -
06 CH +
07 CH -
08 LAST
09 CBL
0A VCR
0B REW
0C PLAY
0D FFWD
0E STOP
0F PAUSE
10 REC
11 AUD
12 FAV
13 INFO
14 EXIT
15 1
16 2
17 3
18 #, also labelled ENTER
19 4
1A 5
1B 6
1C 7
1D 8
1E 9
1F 0
20 BYPASS
21 GUIDE
22 MACRO
23 PAGE +
24 PAGE -
25 A
26 B
27 C
28 * (Star)
29 UP ARROW
2A DOWN ARROW
2B LEFT ARROW
2C RIGHT ARROW
2D SELECT
2E MENU
2F SETTINGS
30 TV/VCR
31 DAY +
32 DAY -
33 MUTE |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Wed Dec 03, 2008 11:13 pm Post subject: |
|
|
Thanks. I've updated the RDF to include your latest keycodes.
Also in IR.exe, if you look at the Raw Data tab and the FA80: row,
you had FA 84 FA 84 00 00. If you change it to
FC 4D FC 6B C4 00 and press the Apply button, you should see the original setup and protocol upgrades before someone did a reset and changed the bytes to FA 84. |
|
Back to top |
|
|
mitten58
Joined: 23 Nov 2008 Posts: 34
|
Posted: Thu Dec 04, 2008 4:56 pm Post subject: |
|
|
Thank you.
I changed those addresses as you recommended and clicked on APPLY.
Now here's what the Protocol tab has, two choices.
But either one is too deep for me.
Protocol $00C4
Protocol $005A
(The Protocol tab, in either instance, also states that the addresses FF00 through FF08 are Byte length, and FF09 through FF14 are Word length.) |
|
Back to top |
|
|
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Thu Dec 04, 2008 10:19 pm Post subject: |
|
|
I don't need to see the data as I already have it from your uploaded .IR file. I just mentioned it in case you needed those device upgrades and protocol upgrades for controlling the cable equipment. |
|
Back to top |
|
|
|