Page 1 of 1
9xx Commands
Posted: Mon Oct 17, 2022 8:33 am
by HamburgerHelper1
Some remotes do not support "980" or "981"
So far we have 972 to 997 documented
What is the official range for 9xx commands?
Posted: Mon Oct 17, 2022 1:27 pm
by The Robman
Posted: Mon Oct 17, 2022 4:38 pm
by 3FG
It isn't clear that there is an "official range", but we have seen as low as 960 in conventional JP1.x remotes. I think that newer remotes may respond to even lower codes, as long as the first digit is a "9".
9xx Commands
Posted: Mon Oct 17, 2022 4:58 pm
by HamburgerHelper1
we have seen as low as 960 in conventional JP1.x remotes.
Interesting, I thought they might go lower than 972
So then it appears that testing more 9xx commands is an appropriate endeavor
Posted: Mon Oct 17, 2022 5:42 pm
by MaskedMan
960 is used in UEI made Directv remotes to program the input button for the tv codes, its unprogrammed by default. 961 is used to program the Directv remote for RF mode.
9xx Commands
Posted: Tue Oct 18, 2022 10:10 am
by HamburgerHelper1
The only thing i have found so far is that on the
URC-3660
URC-3680
URC-2056 TITAN
all of which are JP1.4
968 SET VENDOR SETUP ID
and
989 BLINK BACK VENDOR SETUP ID
Not very helpful though
Did not test all but JP 1.3 Have a 988 that returns 2 blinks the 1st time but not sure what it's doing. Backup upload restores it