View previous topic :: View next topic |
Author |
Message |
fredo55
Joined: 04 Oct 2013 Posts: 25 Location: Canada |
Posted: Mon Apr 25, 2022 5:44 pm Post subject: Long key press |
|
|
I would like to know if it is possible to program a long key press on the Xsight Touch?
My TV Box (Formuler Z8 Pro) uses the long OK press to reboot the box or to delete a recorded video. I use the latter frequently. |
|
Back to top |
|
|
MrMoody
Joined: 27 Jan 2010 Posts: 185 Location: NC,USA |
Posted: Mon Apr 25, 2022 8:18 pm Post subject: |
|
|
The short answer is no, BUT:
Your original remote has to be doing this one of two ways:
Either it is repeating the OK signal and the box recognizes this, in which case the Xsight will work the same way,
Or, OK is sending a different signal after being held for a couple of seconds and released. Find out what OBC that is by learning the long keypress, and set it on a separate button on the Xsight. _________________ URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Mon Apr 25, 2022 8:29 pm Post subject: |
|
|
There is also another way if you want to do it with a short press and it really is a repeating version of the primary function. Make a Macro with the desired function as the only step, check the HOLD box and enter a duration. |
|
Back to top |
|
|
fredo55
Joined: 04 Oct 2013 Posts: 25 Location: Canada |
Posted: Wed Apr 27, 2022 9:28 am Post subject: |
|
|
Thanks a lot. Seems there is no repetition, I succeeded in learning the signal on an available button, it was tricky to get the learning time. |
|
Back to top |
|
|
|