JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Making a RID File

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> ReplayTV
View previous topic :: View next topic  
Author Message
cincyman



Joined: 12 Oct 2008
Posts: 2

PostPosted: Thu Nov 20, 2008 10:45 am    Post subject: Making a RID File Reply with quote

I am either stupid or just don't get it. I am trying to create a RID file to control a Satellite receiver. I have a URC-8910 and can learn the codes. Then I can read the URC-8910 with IR.EXE and the cable I bought. I can see the learned IR codes. I learned 0 -9, power and enter and put these in idgen.exe with protocol (NEC1), the efc and obc code for each IR. Here is where I get confused. From this point what do i do now to create the final rid file. If someone would be kind enough to explain the exact procedure for creating the RID file I would be very happy!
Very Happy
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18444
Location: Chicago, IL

PostPosted: Thu Nov 20, 2008 2:54 pm    Post subject: Reply with quote

The exact process is described here:
http://www.hifi-remote.com/forums/viewtopic.php?p=67534#67534

I have updated the RID Gen zip file to include the additional programs that you need:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2253

The steps outlined in the thread above assume that you have a JP1 upgrade file first, whereas in your case you are jumping straight from the learned signals, which is OK. However, if there is a JP1 upgrade available it would save you some time, so please mention which SAT box you have.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
cincyman



Joined: 12 Oct 2008
Posts: 2

PostPosted: Mon Nov 24, 2008 5:18 pm    Post subject: Making a RID File Reply with quote

Thanks so much for your help! Followed instructions and made the rid file used Flipflop's ISO to get file into Replay and it works great!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> ReplayTV All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central