View previous topic :: View next topic |
Author |
Message |
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Fri Feb 18, 2022 3:24 pm Post subject: Add button change to Nevo C2 |
|
|
It's been a while since using JP1 software for remotes; need advice, I downloaded the contents of my Nevo C2 remote to RMIR software. I want to change/add one button from OEM remote to Nevo C2. What is the procedure; do I delete the device then add the new button etc.?
In advance thanks for your time and support. _________________ Radunn |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Fri Feb 18, 2022 3:41 pm Post subject: |
|
|
Devices tab, double click the device you want to change, make your changes on the functions and buttons tabs, click OK, save, upload to remote. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Fri Feb 18, 2022 5:41 pm Post subject: |
|
|
mdavej wrote: | Devices tab, double click the device you want to change, make your changes on the functions and buttons tabs, click OK, save, upload to remote. | That sounds too easy; lol. I vaguely recall having to clear the Nevo C2 remote, learn the buttons from the OEM to Nevo, download results to RMDU or RMIR import those results to RMIR then upload.... sound familiar or has times/devices changed. Again thanks _________________ Radunn |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Fri Feb 18, 2022 6:44 pm Post subject: |
|
|
Well, there was never any clearing required. But the complexity depends on where this new code comes from. I assumed you already knew what to add. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Fri Feb 18, 2022 7:17 pm Post subject: |
|
|
mdavej wrote: | Well, there was never any clearing required. But the complexity depends on where this new code comes from. I assumed you already knew what to add. | There's one button to add that comes from the OEM remote..... to Nevo C2. This is where I'm at. _________________ Radunn |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Sat Feb 19, 2022 7:14 am Post subject: |
|
|
radunn wrote: | There's one button to add that comes from the OEM remote..... to Nevo C2. This is where I'm at. |
I take it that means that you don't know the details of the signal you want to add. If you learn the signal on the C2, the Learned Signals tab will show you the necessary details. Don't learn it to the button that you finally want the signal on, use any other button. You can then do what mdavej suggests, to assign the signal to your desired button. After testing that it works, then delete the learned signal to restore the button that you used back to its normal function. _________________ Graham |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Sat Feb 19, 2022 3:58 pm Post subject: |
|
|
mathdon wrote: | radunn wrote: | There's one button to add that comes from the OEM remote..... to Nevo C2. This is where I'm at. |
I take it that means that you don't know the details of the signal you want to add. If you learn the signal on the C2, the Learned Signals tab will show you the necessary details. Don't learn it to the button that you finally want the signal on, use any other button. You can then do what mdavej suggests, to assign the signal to your desired button. After testing that it works, then delete the learned signal to restore the button that you used back to its normal function. |
Rather than confuse myself further I am upload two rmdu files; TV LG 49UH610V (downloaded yesterday) and LG-HDTV 49UH6090 2018 currently in use. The problematic button is PreCh; it does not work. I am hoping i can swap TV LG 49UH610V PreCh button/back function (codes etc) to my current RDMU.
My TV is the LG 49UH6090. The objective is to have a working PreCh/Back button on the Nevo C2 that goes back one menu at a time. As Always, thanks!
PS: does the new RMIR use the upgrade function of RMDU where you click the Output tab, click copy and import that into RMIR?
LG-HDTV 49UH6090
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26474
TV LG 49UH610V
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26475 _________________ Radunn |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Sun Feb 20, 2022 11:21 am Post subject: |
|
|
Post your RMIR file as well and tell me which upgrade has the working Prev. I’m still a little lost. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Sun Feb 20, 2022 5:16 pm Post subject: |
|
|
mdavej wrote: | Post your RMIR file as well and tell me which upgrade has the working Prev. I’m still a little lost. | I feel much the same; at a loss. As of now, only the OEM remote preCh/back button works. Recently I downloaded TV LG 49UH610V.rmdu from File Section thinking/hoping the PreCh codes from it will work in my *.RMIR.
I have yet to incorporate TV LG 49UH610V.rmdu's PreCh/Back codes.
Preview before submitting is not working as of now
link to RMIR file (TVs PreCh not working) http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26478 _________________ Radunn |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Mon Feb 21, 2022 1:40 pm Post subject: |
|
|
radunn wrote: | PS: does the new RMIR use the upgrade function of RMDU where you click the Output tab, click copy and import that into RMIR?
|
It support this. On the Devices tab click New to open the Device Upgrade Editor. The Import Raw button then gives you windows to post the device and protocol upgrades from RMDU or even IR.exe. But it is simpler to use the Open button instead of Import Raw. You can then select a .rmdu file to import directly, without opening it in RMDU. _________________ Graham |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4524 Location: Cambridge, UK |
Posted: Mon Feb 21, 2022 1:49 pm Post subject: |
|
|
radunn wrote: | Preview before submitting is not working as of now |
I'm afraid that is mdavej's fault. Preview doesn't work if there are any non-ASCII characters. Composing a text in MS Word or other similar programs and copying it here can unintentionally introduce punctuation marks that are non-ASCII. You will see that the apostrophe in I'm in your quote from him is an angled right-single-quote mark that is non-ASCII. Compare it with the one I used. Such text can be submitted but not previewed. _________________ Graham |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Mon Feb 21, 2022 2:00 pm Post subject: |
|
|
Not my fault. I didn’t copy/paste anything or use a non-ASCII apostrophe, just the one on my iPhone screen. Here is is again, if anybody wants to investigate further. Keyboard show upwards slant left to right but types the opposite slant.
‘ ‘ ‘ ‘ |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Mon Feb 21, 2022 2:56 pm Post subject: |
|
|
@radunn, I replaced your RMIR file with a modified one. Give that a try. |
|
Back to top |
|
|
radunn
Joined: 17 Apr 2006 Posts: 174 Location: Troy, NY |
Posted: Mon Feb 21, 2022 4:39 pm Post subject: |
|
|
mdavej wrote: | @radunn, I replaced your RMIR file with a modified one. Give that a try. | It works well mdavej, what was the fix? Thanks much!
PS (amendment to the above): That's what I was going to do; you beat me to the punch... was it only the FUNCTIONS tab that needed the reedit? _________________ Radunn |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Mon Feb 21, 2022 5:08 pm Post subject: |
|
|
I entered the EFC for "BACK" from the posted RMDU into the "FLASHBACK" function on the Functions tab of the LG device in your RMIR. |
|
Back to top |
|
|
|