View previous topic :: View next topic |
Author |
Message |
landolfi
Joined: 12 Apr 2006 Posts: 57 Location: Chicagoland |
Posted: Wed Nov 11, 2020 4:39 pm Post subject: Proven way to attach battery cover after clip breaks? |
|
|
I have 4 Xsight Touch ARRX18Gs that have all had the clip on the battery cover break. I have been able to continue using them by putting double stick tape behind the battery, and on a few I've folded a piece of masking tape in half with sticky side out to hold the door in place, but just wondered if anyone else has had a better idea. These seem quite sensitive to any slight deformity in the outer housing so anything that goes under the door has to be quite thin. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Wed Nov 11, 2020 5:37 pm Post subject: |
|
|
This is a good question and I'll be curious to see what folks have come up with. The clip on mine is also broken. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
chileboy
Joined: 26 Aug 2020 Posts: 83 Location: NJ |
Posted: Wed Nov 11, 2020 7:01 pm Post subject: |
|
|
I used transparent ("Scotch") double-sided tape on top of the rechargeable battery that allows the cover to remain essentially flush. And in theory, you never need to remove the cover again unless the battery fails. So it's pretty ideal actually.
Double-sided Transparent Tape _________________ - Mark |
|
Back to top |
|
|
|