JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

XSight learned signals decode?
Goto page 1, 2  Next
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Nevo and Xsight Remotes
View previous topic :: View next topic  
Author Message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 6:57 am    Post subject: XSight learned signals decode? Reply with quote

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26000

Found most of the device upgrades I needed in the files and tweaked them as desired. I needed to learn the signals for two devices, a Digiview HDMI switcher, and Pioneer CT-1380WR Double Cassette Deck.

I have learnt the signals to my XSight AR18, but they do not decode into "protocol/device/OBC" data that I could use to create an upgrade.

Also, when I click on "Convert to Device Upgrade" nothing happens.

Running RemoteMaster v2.11 build 1 on a Win10 64-bit machine.

Help? I'd like to create device upgrades for both of these devices.

Thanks.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Jul 11, 2020 9:42 am    Post subject: Reply with quote

Hey Capn, welcome back. The problem is learning technique, you are starting to press the "teaching" button before pressing the "learning" button on the JP1 remote. The cassette deck uses the NEC2 protocol, so in that case you've captured the whole signal but there is often an incomplete signal in front, so you see "multiples" for those. The video switcher uses NECx1 where the repeating section doesn't have data in it, so some of those buttons were not captured. However, the ones that you did capture match an existing device upgrade, so you're all set there.

Pioneer CT-1380WR Double Cassette Deck
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26001

PTC Digiview HM-501E 5x1 HDMI Switch
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11373
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!


Last edited by The Robman on Sat Jul 11, 2020 10:52 am; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 10:05 am    Post subject: Reply with quote

The Robman wrote:
Hey Capn, welcome back. The problem is learning technique, you are starting to press the "teaching" button before pressing the "learning" button on the JP1 remote. The cassette deck uses the NEC2 protocol, so in that case you've captured the whole signal but there is often an incomplete signal in front, so you see "multiples" for those. The video switcher uses NECx1 where the repeating section doesn't have data in it, so some of those buttons were not captured. However, the ones that you did capture match an existing device upgrade, so you're all set there.

Pioneer CT-1380WR Double Cassette Deck
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26001

PTC Digiview HM-501E 5x1 HDMI Switch
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11373


First, THANK YOU for the quick turnaround!
Second - I will try to wait longer after putting the XSight into "listening" mode, but the screen says that it's ready to receive before I push the "teaching button". Will try to exercise greater care when i try again.
Third, <hitting head on desk> how did I not find that upgrade for the HDMI switcher? I swear I looked for it!
Fourth, I think you gave me a bad link for the cassette deck. The link just leads back to my original upload. Wink
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 10:13 am    Post subject: Reply with quote

I found the Cassette upgrade in the file section - no worries.

And THANKS again!
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 10:30 am    Post subject: Reply with quote

Thanks. I overlooked two learnt signals previously on the Cassette deck. I have uploaded them in my http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26000 file.

Don't bother with a complete upgrade, but if you could just decode the EFC/OBCs for me, I'll update the upgrade.

function COPY:
{41.5k,513,lsb}<1,-1|1,-3>(16,-8,A:32,1,-36.604m)*{A=0xf10e5ea1}

function PGM CLEAR:
{41.5k,521,lsb}<1,-1|1,-3>(16,-8,A:32,1,-36.58m)*{A=0xbf405ea1}

And I was very careful with the learning. Have XSights usually done OK with learning? This is the first time I've ever used one for that. I was raised on my Radio Shack 15-1994s and 2117s, and had learning down pat on those!
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Sat Jul 11, 2020 11:00 am    Post subject: Re: XSight learned signals decode? Reply with quote

Capn Trips wrote:
...when I click on "Convert to Device Upgrade" nothing happens.
I think you have to select one or more learns before you click convert.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Jul 11, 2020 11:00 am    Post subject: Reply with quote

Yeah sorry, I grabbed ur link by mistake, but I have updated the earlier posts with the correct link.

You learned those last 2 buttons perfectly and they decode perfectly in RMIR (see screenshot below), so are you not seeing the decodes? If not, we need to fix that so you can be DIY with learns. I have added the 2 new buttons to the original cassette RMDU file.

I've never learned with an XSight, so I can't comment on that, but regardless of the remote being used to learn, it's always a good idea to wait a second or two before pressing the teaching remote button.


_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 11:24 am    Post subject: Reply with quote

Well, here's what my learned display shows:


So is it a problem with my DecodeIR.dll? I installed the full RM installation package and the "About" tab on RMIR says "DecodeIR version 2.45"
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 11:26 am    Post subject: Re: XSight learned signals decode? Reply with quote

mdavej wrote:
Capn Trips wrote:
...when I click on "Convert to Device Upgrade" nothing happens.
I think you have to select one or more learns before you click convert.


Understood. I tried that - highlighting all of the learns on one device, highlighting a single learn, highlighting all of them, yet nothing ever happens.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Sat Jul 11, 2020 11:35 am    Post subject: Re: XSight learned signals decode? Reply with quote

Capn Trips wrote:
mdavej wrote:
Capn Trips wrote:
...when I click on "Convert to Device Upgrade" nothing happens.
I think you have to select one or more learns before you click convert.


Understood. I tried that - highlighting all of the learns on one device, highlighting a single learn, highlighting all of them, yet nothing ever happens.
If the protocol is unknown, as above, it won't convert.
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sat Jul 11, 2020 11:40 am    Post subject: Re: XSight learned signals decode? Reply with quote

mdavej wrote:
Capn Trips wrote:
mdavej wrote:
Capn Trips wrote:
...when I click on "Convert to Device Upgrade" nothing happens.
I think you have to select one or more learns before you click convert.


Understood. I tried that - highlighting all of the learns on one device, highlighting a single learn, highlighting all of them, yet nothing ever happens.
If the protocol is unknown, as above, it won't convert.


Aha. So I have to solve my decoding problem first. Understood.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Jul 11, 2020 2:05 pm    Post subject: Reply with quote

Capn Trips wrote:
So is it a problem with my DecodeIR.dll? I installed the full RM installation package and the "About" tab on RMIR says "DecodeIR version 2.45"

Graham has switched RMIR to using IRTransDemogifier instead of DecodeIR, but there is still an option to switch back. I hadn't noticed that mine was set to DecodeIR still.

To switch back, go to Options > Set IR Decoder > DecodeIR, then your learns will decode.

Hopefully Barf can jump in to help with why these learns didn't decode. I looked at the raw data and they look clean.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sun Jul 12, 2020 3:22 pm    Post subject: Reply with quote

I just realized that the Pioneer deck should really use the Pioneer protocol, rather than the NEC2 protocol, so I have updated the RM file accordingly.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Sun Jul 12, 2020 4:37 pm    Post subject: Reply with quote

The Robman wrote:
Capn Trips wrote:
So is it a problem with my DecodeIR.dll? I installed the full RM installation package and the "About" tab on RMIR says "DecodeIR version 2.45"

Graham has switched RMIR to using IRTransDemogifier instead of DecodeIR, but there is still an option to switch back. I hadn't noticed that mine was set to DecodeIR still.

To switch back, go to Options > Set IR Decoder > DecodeIR, then your learns will decode.

Hopefully Barf can jump in to help with why these learns didn't decode. I looked at the raw data and they look clean.


See how old I am? I never even HEARD of Transmogrifier (outside of Calvin and Hobbes comic strips!)
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 4515
Location: Cambridge, UK

                    
PostPosted: Mon Jul 13, 2020 9:24 am    Post subject: Reply with quote

Many of the signals are NEC2 but with an unusual frequency. The standard frequency for all NEC signals is 38400Hz, yours are 41400Hz or higher. That difference of 3000Hz is outside the default tolerance of IrpTransmogrifier, so it finds no decodes.

For the next build, I have added a field in the Learned Signals tab so that the tolerance can be changed. Setting it to 3500 makes the signals decode as NEC2 and you can then convert them to a device upgrade using the conversion button. However, due to the frequency difference they may not work the equipment.

A few other signals decode as NECx1 with DecodeIR, but they are not valid NECx1 signals as the repeat frames are wrong, they send a 1 where it should be a 0. So there is no way of making them decode with IrpTransmogrifier, and if they were converted as part of a device upgrade then they probably would not work, as the equipment presumably accepts what is sent by the OEM remote that they were learned from.
_________________
Graham
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Nevo and Xsight Remotes All times are GMT - 5 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control