JP1 Remotes

I'm from Brazil, RMIR sends this message "No RDF matches signature starting 3148"

raw download
http://www.hifi-remote.com/forums/dload ... e_id=25697

picture
https://i.imgur.com/xG5UyKz.jpg
https://i.imgur.com/zdIqjfz.jpg
https://i.imgur.com/HrxFnft.jpg

I don't speak english using google translator.
thanks.

Looks like Inteset 422 or Insignia 415 remotes.

Inteset 422 or Insignia 415 download aborted

Insignia NS-RC05A-11

https://i.imgur.com/gorTTHs.jpg

http://www.hifi-remote.com/forums/dload ... e_id=25698

You can put 15 buttons into a macro. Please create enough macros so that every button on the remote is in a macro, then do a raw download. Please then post the new .IR file along with a list of buttons that are in each macro. (Note: the button which holds the macro doesn't need to be in any of the other macros).

Here's a first draft of the RDF to get you started...

http://www.hifi-remote.com/forums/dload ... e_id=25700

macro test with old rdf
http://www.hifi-remote.com/forums/dload ... e_id=25702

key list
https://controlc.com/b67fce94

image
https://i.imgur.com/1ZwPrqe.jpg


Test first RDF
http://www.hifi-remote.com/forums/dload ... e_id=25704

http://www.hifi-remote.com/forums/dload ... e_id=25703

DTH company remote control

thanks for your help

Sorry that I am late responding, I missed that you had posted an update.

The original image that you posted has button names like CLARO, HOME THEATER, etc whereas the button names that you posted use the names from the PCB.

That aside, I think your results show that I got the names right.

Correct, the pcb names were intentional, to make no mistake.

https://i.imgur.com/ikbR27k.jpg

[Settings]
VPT Device=$01C.7.8.0.0 DeviceButtons
VPT Status=$01B.2.1.0.0 (Off;On)
dev1 uses VPT=$01D.0.1.1.0 (No;Yes)
TV uses VPT=$01D.1.1.1.0 (No;Yes)
dev3 uses VPT=$01D.2.1.1.0 (No;Yes)
AUX uses VPT=$01D.3.1.1.0 (No;Yes)
Claro uses VPT=$01D.4.1.1.0 (No;Yes)
HT uses VPT=$01D.5.1.1.0 (No;Yes)
dev7 uses VPT=$01D.6.1.1.0 (No;Yes)
dev8 uses VPT=$01D.7.1.1.0 (No;Yes)
Channel Lock=$01B.3.1.0.0 (Off;On)
dev1 Setup Code Lock=$01A.0.1.1.0 (Off;On)
TV Setup Code Lock=$01A.1.1.1.0 (Off;On)
dev3 Setup Code Lock=$01A.2.1.1.0 (Off;On)
AUX Setup Code Lock=$01A.3.1.1.0 (Off;On)
Claro Setup Code Lock=$01A.4.1.1.0 (Off;On)
HT Setup Code Lock=$01A.5.1.1.0 (Off;On)
dev7 Setup Code Lock=$01A.6.1.1.0 (Off;On)
dev8 Setup Code Lock=$01A.7.1.1.0 (Off;On)
Initial Device Mode=$01E.7.8.0.0 DeviceButtons
Byte1F=$01F.3.4.$0F.0
Byte20=$020.3.4.$0F.0

my change

[Settings]
VPT Device=$01C.7.8.0.0 DeviceButtons
VPT Status=$01B.2.1.0.0 (Off;On)
dev1 uses VPT=$01D.0.1.1.0 (No;Yes)
Claro uses VPT=$01D.1.1.1.0 (No;Yes)
dev3 uses VPT=$01D.2.1.1.0 (No;Yes)
AUX uses VPT=$01D.3.1.1.0 (No;Yes)
HT uses VPT=$01D.4.1.1.0 (No;Yes)
TV uses VPT=$01D.5.1.1.0 (No;Yes)
dev7 uses VPT=$01D.6.1.1.0 (No;Yes)
dev8 uses VPT=$01D.7.1.1.0 (No;Yes)
Channel Lock=$01B.3.1.0.0 (Off;On)
dev1 Setup Code Lock=$01A.0.1.1.0 (Off;On)
Claro Setup Code Lock=$01A.1.1.1.0 (Off;On)
dev3 Setup Code Lock=$01A.2.1.1.0 (Off;On)
AUX Setup Code Lock=$01A.3.1.1.0 (Off;On)
HT Setup Code Lock=$01A.4.1.1.0 (Off;On)
TV Setup Code Lock=$01A.5.1.1.0 (Off;On)
dev7 Setup Code Lock=$01A.6.1.1.0 (Off;On)
dev8 Setup Code Lock=$01A.7.1.1.0 (Off;On)
Initial Device Mode=$01E.7.8.0.0 DeviceButtons
Byte1F=$01F.3.4.$0F.0
Byte20=$020.3.4.$0F.0

https://i.imgur.com/k67uR2C.jpg

Check your PMs, there's some additional info that I need.

additional information

download raw primary second remote control, no reset 981

http://www.hifi-remote.com/forums/dload ... e_id=25709

I think I've got the RDF pretty close to complete, please test it out and let me know what you find.

http://www.hifi-remote.com/forums/dload ... e_id=25700

Thank you Rob for your time, I will do tests.