JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Is it Possible?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
ryton



Joined: 10 Nov 2015
Posts: 3

PostPosted: Mon Oct 14, 2019 6:44 am    Post subject: Is it Possible? Reply with quote

I just acquired a LG RH398H-M DVD/HDD Recorder with USB input ($5) which was missing its remote. I contacted LG Parts who identified the original remote as a AKB36160903 (Special order and too expensive). I have a Philips PM725T universal remote and was able to find a LG device code (0392) from another Philips remote's code list which worked and provides all of my required control of the recorder except for access to the "Home Screen Menu". Unfortunately, this Menu is where my needed USB functions reside. I also have a One-For-All URC-6690 JP1 programmable remote, setup with DVD code 0591, which provides only some basic function controls. Next I "Learned" all of the missing function controls available from the Philips into the 6690. Now I need to upgrade the 6690 to add the missing "Home Screen Menu" control but I have no idea on how to proceed. Please note that I have a fully functional JP1.2/3 interface, that I had built previously, and have a beginner's knowledge of IR, RMIR and RM. Any guidance from the experts would be greatly appreciated!!!
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 388
Location: Hong Kong

PostPosted: Mon Oct 14, 2019 8:37 am    Post subject: Reply with quote

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25675
Try this file.

Also, I noted that if I use rmir 209 build 5 to download the learned signals off nevo c2, the protocol is none/multiple. If I download with rmir 207, it shows necx1.
Back to top
View user's profile Send private message
mathdon
Expert


Joined: 22 Jul 2008
Posts: 3252
Location: Cambridge, UK

PostPosted: Tue Oct 15, 2019 5:23 am    Post subject: Reply with quote

chuliu wrote:
Also, I noted that if I use rmir 209 build 5 to download the learned signals off nevo c2, the protocol is none/multiple. If I download with rmir 207, it shows necx1

This is because of the change of default decoder from DecodeIR to IrpTransmogrifier. DecodeIR is more forgiving of poorly learned signals but it has not been maintained for many years. IrpTransmogrifier gives many advantages, including reliable conversion of learned signals to device upgrade. In v2.09 both decoders are available. You can change the default with the menu item Options > Set IR Decoder or use this item to switch dynamically between the two while viewing the learned signals.
_________________
Graham
Back to top
View user's profile Send private message
chuliu



Joined: 04 Dec 2010
Posts: 388
Location: Hong Kong

PostPosted: Tue Oct 15, 2019 10:47 am    Post subject: Reply with quote

mathdon wrote:
chuliu wrote:
Also, I noted that if I use rmir 209 build 5 to download the learned signals off nevo c2, the protocol is none/multiple. If I download with rmir 207, it shows necx1

This is because of the change of default decoder from DecodeIR to IrpTransmogrifier. DecodeIR is more forgiving of poorly learned signals but it has not been maintained for many years. IrpTransmogrifier gives many advantages, including reliable conversion of learned signals to device upgrade. In v2.09 both decoders are available. You can change the default with the menu item Options > Set IR Decoder or use this item to switch dynamically between the two while viewing the learned signals.


Thanks. I assumed something like that, too.
Back to top
View user's profile Send private message
ryton



Joined: 10 Nov 2015
Posts: 3

PostPosted: Tue Oct 15, 2019 10:57 am    Post subject: Thanks for the file chuliu Reply with quote

Thanks for the file chuliu... Now to figure out how to use it!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19080
Location: Chicago, IL

PostPosted: Tue Oct 15, 2019 12:25 pm    Post subject: Re: Thanks for the file chuliu Reply with quote

ryton wrote:
Thanks for the file chuliu... Now to figure out how to use it!

http://www.hifi-remote.com/wiki/index.php/JP1_-_Just_How_Easy_Is_It%3F_-_RM-IR_Version
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central