I just found and bought a brand new, never been opened AXXR18G remote. I'm able to upload the *.MRIR programing backup file (from a used remote whose buttons are failing) using RM 2.0.8 b6 or 2.0.9 b3. The upload appears to be successful (all functions work), despite failing the verification step (written data does not match upload).
I clicked the download button for the first time and got a window saying there's new firmware, but it gave no details on what version that would be or where the BIN file is coming from. The current FW is 1.2.17. After clicking continue, the remote goes into Upgrade Mode and then a window appears saying, "remote has opened in a new mode in which Enhanced power management is still enabled..." EVEN THOUGH the given registry entry's Enhanced Power Management key IS SET to ZERO!!
If I click continue again, the download fails and the remote remains in upgrade mode until I disconnect USB and remove the battery. After it reboots and reconnects to USB, I try again and the same thing happens.
Any ideas how to get the FW to install?
There's only two reg entries for HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_06E7... &PID_8001 and &PID_8005. Again, BOTH pwr mgt keys are zero.
Brand New AXXR18G Firmware issue
Moderator: Moderators
Ha! There was a second device rolled up under the &PID_8005 group, named "Xsight Touch," that had EPM set to 1. I changed it to 0 and will test when I get home (edited via RDP from work).
Thanks for pointing that possibly out.
Thanks for pointing that possibly out.
Last edited by chrusion on Fri Sep 20, 2019 3:45 pm, edited 1 time in total.