JP1 Remotes

After many years of faithful service, our DVICO Fusion remote is gone (and in a house with a one year old, that means it won't be found for at least six months). The buttons were all worn down so we needed a replacement anyway.

I still have the USB IR receiver for the Fusion in place. Can this receiver be used for other universal remotes or do I need to buy additional hardware?

One of my favorite features about the Fusion was that its driver showed a virtual remote on the screen for easy programming. Are there any other remotes with a similar feature.

This is not for a universal remote. I like segregated remotes for each device, so this will be for SageTV only.

You don't say exactly which model you have, we have 3 DVICO devices in our file section:

DVICO FusionHDTV7 Dual Express
https://www.hifi-remote.com/forums/dload ... le_id=6020

DViCO FusionHDTV5 Gold Plus ATSC
https://www.hifi-remote.com/forums/dload ... le_id=2801

Dvico FusionHDTV DVB-T
https://www.hifi-remote.com/forums/dload ... le_id=2460

So, assuming your device is one of those, or uses the same codes as one of those, you could load the code into a JP1 remote as a replacement for your DVICO remote.

I've got 3 new ones like this if interested. Came with hdtv7 dual express tuners.