Xsight Touch -soft keys work but nothing else does

TK978 · Post by **TK978** » Mon Jan 21, 2019 12:55 pm

I bought an Xsight touch used I thought it was working properly (was set up and left in spare bedroom so not sure if it had problem from the start)
It seems to upload and download properly andI upgraded firmware. The soft keys seem to work no problem but all hard keys do not work. I have gotten the channel +/- buttons and volume +/- to scroll up and down on a Roku menu even though I did not program them to do that...so it seems the hard buttons are capable of working they just seem unprogramed including the home/favorites/activites/ device buttons dont work which are part of the base firmware correct?.....anybody have any ideas...tried a reset didnt seem to work or did not solve problem anyways

mdavej · Post by **mdavej** » Mon Jan 21, 2019 12:59 pm

Post your RMIR file so we can take a look.

TK978 · Post by **TK978** » Mon Jan 21, 2019 1:15 pm

Thanks for reply but I used this reset (below) after I tried the reset under setup on the remote...the following worked then upgrade frimware again

Press Power and OK while putting the battery back in. Then re-connected to PC and continue with the firmware upgrade