Page 1 of 1

4K ULTRABOX+ (USW4001NCP) - Technicolor (old Thompson) - NC+

Posted: Wed Sep 12, 2018 2:48 am
by johnplacek
Hello All,

I need a .bin file for this receiver. I tried almost all aviable .bin files from above brands.


Thanks in advance,

Posted: Wed Sep 12, 2018 9:01 am
by mdavej
This is mainly to help Alan find the correct code for you. Here are all the Technicolor cable/sat codes in the UEI database. Open this bin file from RMIR. It is NOT a slingbox bin but is several devices someone could try.
https://www.hifi-remote.com/forums/dload ... e_id=25323

Posted: Sun Sep 23, 2018 3:26 am
by alanrichey
Sorry for the delayed reply, been away on a cruise :D

I have a case of too much information here. I need a simple manufacturer & model number, but I have no idea which of the stuff in the title is relevant.

Can you simplify it ?

Posted: Sun Sep 23, 2018 8:50 am
by The Robman
It appears to be one of these STBs:
https://ncplus.pl/~/media/ncplus/dokume ... der-4k.pdf

So my guess is:
Brand: Ultrabox+
Model: USW4001NCP
Features: 4k, NC+

Posted: Tue Sep 25, 2018 2:24 am
by johnplacek76
Hi All,

Thanks Robman for fast replay (had problem with my account).

Alan,
Those below information from Robman are correct:

Brand: Ultrabox+ (I think this name is just for SAT Operator)
Model: USW4001NCP

NC+ is a polish SAT operator.

The most important buttons in remote for me are power on/off and channel +/-.

Thanks again.

Posted: Tue Sep 25, 2018 7:57 am
by alanrichey
I'm afraid that Ultrabox is not a recognized manufacturer in the Logitech Harmony database, where I get the codes form, so I can't help.

Posted: Tue Sep 25, 2018 8:14 am
by mdavej
Alan, did you see the UEI codes in the second post? If we can't narrow it down, the OP could simply try every device in my file. Not sure how to best approach on slingbox. Would we just make several bin files and load them all at once?

Posted: Tue Sep 25, 2018 11:20 am
by johnplacek76
Hi Alan,

maybe it can help - the brand of this SAT receiver is Technicolor (for purpose of SAT Operator it was named Ultrabox+). The model is USW4001NCP, below link with instruction and some pictures - only in polish :(

https://docplayer.pl/65855863-4k-ultrab ... ukcja.html

Thx

Posted: Tue Sep 25, 2018 11:55 am
by alanrichey

Posted: Tue Sep 25, 2018 1:53 pm
by johnplacek76
Amazing it's working - thank you Alan !!!! :P :P :P :P

Posted: Wed Sep 26, 2018 12:37 am
by alanrichey
Good. Team effort, glad we could help.