JP1 Remotes

I have downloaded my AKAI CD player IR code in Lirc format but I have no idea how to make this codes work on my Xsight touch. Does any one can show me how to made it works?

Many Thanks!


#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Wed Jun 23 20:25:14 2004
#
# contributed by
#
# brand: Akai
# model: RC-C79
# supported devices:
#

begin remote

name Akai_RC-C79
bits 16
flags SPACE_ENC
eps 25
aeps 100

header 9123 4407
one 654 1594
zero 654 468
ptrail 654
repeat 9133 2155
pre_data_bits 16
pre_data 0xB14E
gap 39857
toggle_bit 0


begin codes
KEY_1 0x000000000000807F # Was: 1
KEY_2 0x00000000000040BF # Was: 2
KEY_3 0x000000000000C03F # Was: 3
KEY_4 0x00000000000020DF # Was: 4
KEY_5 0x000000000000A05F # Was: 5

Do you still have the original Akai remote? If so, just learn the signals using your Xsight and it will give you all the codes you need to create an upgrade. Besides, this LIRC file only has 5 buttons.

But to answer your question, this LIRC file uses the NEC1 protocol with a device code of 141 and the 5 buttons shown use OBCs 1 through 5.

The Robman wrote:Do you still have the original Akai remote? If so, just learn the signals using your Xsight and it will give you all the codes you need to create an upgrade. Besides, this LIRC file only has 5 buttons and they aren't even labeled.

No, my remote was damaged by the battery leakage, half of the buttons did not work, but I can only search the full function IR code from lirc. The file I post is just part of the file, I got the full file in hand, but don't know how to translate to remote master & upload to my Xsight touch.

If you post the full file, I can create an RMDU upgrade from it.

Here is an upgrade with just the numeric buttons, as that's all that you posted:
http://www.hifi-remote.com/forums/dload ... e_id=25178

The Robman wrote:Here is an upgrade with just the numeric buttons, as that's all that you posted:
http://www.hifi-remote.com/forums/dload ... e_id=25178

Here it is. Many Many Thanks Robman.

#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Wed Jun 23 20:25:14 2004
#
# contributed by
#
# brand: Akai
# model: RC-C79
# supported devices:
#

begin remote

name Akai_RC-C79
bits 16
flags SPACE_ENC
eps 25
aeps 100

header 9123 4407
one 654 1594
zero 654 468
ptrail 654
repeat 9133 2155
pre_data_bits 16
pre_data 0xB14E
gap 39857
toggle_bit 0


begin codes
KEY_1 0x000000000000807F # Was: 1
KEY_2 0x00000000000040BF # Was: 2
KEY_3 0x000000000000C03F # Was: 3
KEY_4 0x00000000000020DF # Was: 4
KEY_5 0x000000000000A05F # Was: 5
KEY_6 0x000000000000609F # Was: 6
KEY_7 0x000000000000E01F # Was: 7
KEY_8 0x00000000000010EF # Was: 8
KEY_9 0x000000000000906F # Was: 9
KEY_0 0x00000000000002FD # Was: 10
KEY_1 0x000000000000827D # Was: 11
KEY_2 0x00000000000042BD # Was: 12
KEY_3 0x000000000000C23D # Was: 13
KEY_4 0x00000000000022DD # Was: 14
KEY_5 0x000000000000A25D # Was: 15
KEY_6 0x000000000000629D # Was: 16
KEY_7 0x000000000000E21D # Was: 17
KEY_8 0x00000000000012ED # Was: 18
KEY_9 0x000000000000926D # Was: 19
KEY_0 0x00000000000052AD # Was: 20
X_KEY_0+ 0x000000000000B04F # Was: KEY_0+
KEY_0 0x00000000000000FF # Was: 0
program 0x00000000000008F7
KEY_CLEAR 0x000000000000C837 # Was: CLEAR
RANDOM 0x00000000000018E7
INDEX 0x000000000000F00F
KEY_TIME 0x00000000000058A7 # Was: TIME
KEY_AGAIN 0x000000000000D827 # Was: REPEAT
KEY_EDIT 0x00000000000050AF # Was: EDIT
A/B 0x00000000000028D7
DIMMER 0x00000000000032CD
PEAK 0x00000000000030CF
DAC 0x000000000000728D
DIGITAL 0x000000000000B24D
KEY_REWIND 0x000000000000E817
KEY_PLAY 0x0000000000006897
KEY_PREVIOUS 0x0000000000007887
KEY_NEXT 0x000000000000B847
KEY_VOLUMEUP 0x0000000000009867 # Was: Vol+
KEY_EJECTCD 0x000000000000A857 # Was: Eject
KEY_PAUSE 0x000000000000708F # Was: Pause
KEY_PLAY 0x00000000000038C7 # Was: Play
KEY_STOP 0x000000000000F807 # Was: Stop
KEY_VOLUMEDOWN 0x000000000000D02F # Was: Vol-
end codes

end remote

I have added the rest of the functions to the RMDU, same link as before, and have done my best to assign them to logical buttons, but feel free to re-arrange them if you like. There were 2 play buttons, so I guessed that one of them was really Fast Forward. I was only expecting numeric buttons in the range 0-9 but this one has numeric buttons in the range 0-20, so not sure what buttons 10-20 do, my guess is that you can directly chose tracks with those numbers, but it would have been easier if you could just type the number one digit at a time, and what do you do for CDs that have more than 20 tracks?

By the way, what is the model number of this CD player?

The Robman wrote:I have added the rest of the functions to the RMDU, same link as before, and have done my best to assign them to logical buttons, but feel free to re-arrange them if you like. There were 2 play buttons, so I guessed that one of them was really Fast Forward. I was only expecting numeric buttons in the range 0-9 but this one has numeric buttons in the range 0-20, so not sure what buttons 10-20 do, my guess is that you can directly chose tracks with those numbers, but it would have been easier if you could just type the number one digit at a time, and what do you do for CDs that have more than 20 tracks?

By the way, what is the model number of this CD player?

Many Thanks Robman. My CD player is Akai CD-79, it's hard to find out the IR codes except Lirc have it.

Were you able to test the file?

I think I've found what the original remote looks like...

The Robman wrote:Were you able to test the file?

I think I've found what the original remote looks like...

Yes, that's it. I will test it today night.

I have test the codes and all of them work perfect. Thanks again.