View previous topic :: View next topic |
Author |
Message |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sat Mar 24, 2018 2:10 pm Post subject: |
|
|
![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gulyasal
Joined: 10 Mar 2018 Posts: 8 Location: Zurich, Switzerland |
Posted: Sat Mar 24, 2018 2:59 pm Post subject: Thank you so much! |
|
|
Oh my goodness, I received an email today from Rob letting me know that you were working on a solution for me, and I didn't know! I am humbled by the attention that you have given me. I will definitely download the .bin and give it a go. The Ocilion T220 does show up for the Logitech Harmony; I needed to amend it slightly, as it repeated all commands three times. Once I edited the Harmony to repeat the signal only once, it worked. However, I could not find a solution for the Slingbox, so I am very excited by this. Thank you. Apologies for my silence! Alex. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gulyasal
Joined: 10 Mar 2018 Posts: 8 Location: Zurich, Switzerland |
Posted: Sat Mar 24, 2018 4:08 pm Post subject: Test Results |
|
|
OK, I had an opportunity to install the .bin on the Slingbox. Was able to successfully install, and at least the key buttons (power, up, down, ok, menu) are working! Thank you! Unfortunately, I have the same issue as with the Harmony remote: each button press results in the signal repeating three times, so "up" results in the channels going up three channels at a time rather than only one channel. Is there a way to fix this? (Incidentally, I clicked on "notify me when a reply is posted" so I know when some has replied to this) Many thanks, Alex. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gulyasal
Joined: 10 Mar 2018 Posts: 8 Location: Zurich, Switzerland |
Posted: Sun Mar 25, 2018 10:45 am Post subject: |
|
|
I'm sorry chuliu but many buttons don't work at all now: 0, up, down, ok, channel+, channel-, guide, menu, info do not function. Power works and numbers 1-9 work though, and work correctly (repeating only one time). |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Sun Mar 25, 2018 12:27 pm Post subject: |
|
|
Can you please test one more time by downloading an updated file at the same link? It seems that I made a mistake pasting the values.
Thanks, |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gulyasal
Joined: 10 Mar 2018 Posts: 8 Location: Zurich, Switzerland |
Posted: Mon Mar 26, 2018 3:21 pm Post subject: T220 |
|
|
Dear chuliu, same issue. 1-9 and power works, but none of the other buttons function. The download from Rob worked better in that the buttons generated the correct response from the set top box, except that the buttons repeated three times instead of once. Up and down went up and down three times; forward and skip forward went forward and skip forward three times. Even the OK button repeated three times. Is it possible to refine Rob's RMDU file instead? Alex. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Tue Mar 27, 2018 4:48 pm Post subject: |
|
|
For some reason I failed to modify rob's file.
Instead I re-worked on my own file. I made sure that the signal pattern is the same as those from ocilion from harmony remote. Note that you said you set harmony to repeat 1 time, whereas I set it to repeat zero times and one cannot hold the button. It means that one press on a button sends 1 signal only and long hold that button won't send additional signal. So there is only one signal sequence for my file, where as your harmony will send 2 signal sequence (repeat one) on a press of a button, and repeat the signal if the button is hold.
Please download another updated file from the original link and hopefully this will get it done. If not, we will work on the repeat count. Thanks. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gulyasal
Joined: 10 Mar 2018 Posts: 8 Location: Zurich, Switzerland |
Posted: Thu Mar 29, 2018 2:46 pm Post subject: It works! |
|
|
Downloaded it. The only thing I changed was the setup code from 0000 to 2000, as the Slingbox crashed every time I tried to upload C0000_pl.bin. But it worked as c2000_pl.bin. All buttons worked! Thank you for saving my Slingbox experience! I can use the box now! Regards, Alex. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Fri Mar 30, 2018 12:43 am Post subject: Re: It works! |
|
|
gulyasal wrote: | Downloaded it. The only thing I changed was the setup code from 0000 to 2000, as the Slingbox crashed every time I tried to upload C0000_pl.bin. But it worked as c2000_pl.bin. All buttons worked! Thank you for saving my Slingbox experience! I can use the box now! Regards, Alex. |
Glad it works for you. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Apr 02, 2018 8:33 am Post subject: |
|
|
So was the final file that worked a modified version of the file that I posted? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gulyasal
Joined: 10 Mar 2018 Posts: 8 Location: Zurich, Switzerland |
Posted: Mon Apr 02, 2018 3:17 pm Post subject: Ocilion T220 |
|
|
Rob, the final file that worked and which I using now was the version that chuliu posted. It was an .rmdu file that I converted to a .bin file using the Remote Master application. I exported to Slingbox PL remote and used 2000 as the setup code.
I tried the one you sent, but it repeated too many times. So did chuliu's, but he sent a new version which now repeats only once.
Alex. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Apr 02, 2018 9:22 pm Post subject: |
|
|
The original request was just to create a bin file, rather than to create a non-repeating one, and as the protocol was a new protocol, we needed to create a new executor. I made the executor repeat as the original signal was a repeating signal.
When I decode the learns, I got different results than what 3FG and chuliu got, so I was curious what the final bin file was based on. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
chuliu
Joined: 04 Dec 2010 Posts: 443 Location: Hong Kong |
Posted: Tue Apr 03, 2018 7:53 am Post subject: |
|
|
The Robman wrote: | The original request was just to create a bin file, rather than to create a non-repeating one, and as the protocol was a new protocol, we needed to create a new executor. I made the executor repeat as the original signal was a repeating signal.
When I decode the learns, I got different results than what 3FG and chuliu got, so I was curious what the final bin file was based on. |
It was I who captured the signal from harmony remote but when I did, I didn't change repeat to 1. Maybe that's the root of the repeating issue. I had to make repeat count to zero and hold to no in pb for it to work.
The rest is like what Rob said, we decoded the signal differently. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Tue Apr 03, 2018 12:55 pm Post subject: |
|
|
We often get requests from Slingbox users to change a protocol to be non-repeating, but normally the request is for a standard protocol (ie, NEC1, etc). In this case, we had a brand new protocol that we hadn't seen before so the first step was creating a new executor and having the user verify that it works (even if it repeats too fast). Then, once the repeating issue has been identified, we modify the executor again, so it's all normal. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|