|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
MrMoody
Joined: 27 Jan 2010 Posts: 185 Location: NC,USA |
Posted: Sat Dec 30, 2017 1:11 pm Post subject: Fire TV IR via Onkyo - works! |
|
|
I got an Amazon Fire TV stick for Christmas, which is nice because I have a Prime account but I had no way to watch that directly on the home theater.
As most of you may know, the Fire TV stick is bluetooth control only, and comes with a sad little bluetooth remote that doesn't perform all that well, presumably due to signal/path issues.
I plugged it into one of the HDMI inputs on my Onkyo TX-NR709 receiver and it works fine except for having to juggle two remotes and the remote signal issues (mainly sluggishness).
So I dug around Google for IR solutions and discovered the stick supports CEC. After some more digging and trying more obvious things that didn't work, I found the tab in the Onkyo code list labeled "BD (via RIHD)."
These codes operate the Fire TV, including all functions from the original and some others that aren't, and much more snappily than the bluetooth remote.
I have posted an upgrade at http://hifi-remote.com/forums/dload.php?action=file&file_id=25038 . In theory, the functions should operate any CEC capable input device to a greater or lesser degree. "HDMI Control" must be enabled under the receiver main setup menu>Hardware setup>HDMI. When you exit the menu you'll briefly see "Searching" then "Player" "Fire TV Stick" on the receiver display. _________________ URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Sat Dec 30, 2017 4:00 pm Post subject: |
|
|
Great find. CEC control of Fire Stick works pretty with my Sony, Toshiba and Vizio TVs as well since they have a full set of nav, transport and menu commands. |
|
Back to top |
|
|
nohjy
Joined: 23 Jan 2015 Posts: 21
|
Posted: Sun Dec 31, 2017 12:26 am Post subject: |
|
|
Just in case some are looking for other ways to go about controlling their FireTV and other streaming devices with USB ports, you can also just buy an MCE remote like the one linked below. The IR dongle that comes with it will allow you to control your Fire TV and many other streaming devices with a USB port with your JP1 Remote. I just learned the relevant keys and it works perfectly. This also adds some new remote functions that are not available on oem remote.
https://www.amazon.com/Windows-Control-Infrared-Receiver-Ultimate/dp/B00224ZDFY/ref=sr_1_2?ie=UTF8&qid=1514697580&sr=8-2&keywords=mce+remote
Last edited by nohjy on Sun Dec 31, 2017 3:35 pm; edited 3 times in total |
|
Back to top |
|
|
MrMoody
Joined: 27 Jan 2010 Posts: 185 Location: NC,USA |
Posted: Sun Dec 31, 2017 10:43 am Post subject: |
|
|
Interesting, but I'm missing how this works. How does it go from dongle to stick? PC required? Does it use Bluetooth or the WiFi network to connect to the stick? _________________ URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget |
|
Back to top |
|
|
pH7_jp1
Joined: 14 Sep 2003 Posts: 480 Location: Sterling Heights, MI |
Posted: Sun Dec 31, 2017 11:04 am Post subject: |
|
|
Quote: | Interesting, but I'm missing how this works. | The USB plugs into the back of the Fire (not all Fire TVs have the USB plug). The ir dongle receives the IR and converts it to keyboard commands (as though a USB keyboard were plugged into the Fire).
EDIT: I just re-read your original post and realized you have the Fire TV stick, which does not have the USB plug that is on the Fire TV gen 1.
You can achieve the same thing with FLIRC. Since there is no cord on the FLIRC and the USB plug is on the back of the Fire, you either need a short USB extension cord or instead I used a small mirror like THIS just behind the Fire to reflect the IR signal to the FLIRC. The CEC solution is more elegant if you can make to work. |
|
Back to top |
|
|
nohjy
Joined: 23 Jan 2015 Posts: 21
|
Posted: Sun Dec 31, 2017 11:32 am Post subject: |
|
|
pH7_jp1 wrote: | Quote: | Interesting, but I'm missing how this works. | The USB plugs into the back of the Fire (not all Fire TVs have the USB plug). The ir dongle receives the IR and converts it to keyboard commands (as though a USB keyboard were plugged into the Fire).
EDIT: I just re-read your original post and realized you have the Fire TV stick, which does not have the USB plug that is on the Fire TV gen 1.
You can achieve the same thing with FLIRC. Since there is no cord on the FLIRC and the USB plug is on the back of the Fire, you either need a short USB extension cord or instead I used a small mirror like THIS just behind the Fire to reflect the IR signal to the FLIRC. The CEC solution is more elegant if you can make to work. |
I made the edits. Thanks for the heads up. |
|
Back to top |
|
|
MrMoody
Joined: 27 Jan 2010 Posts: 185 Location: NC,USA |
Posted: Sun Dec 31, 2017 1:09 pm Post subject: |
|
|
The stick does have a micro USB jack, which I had assumed is for power only, which may or may not be true. Even if it would work, it would still have to supply 5W of power some way.
The CEC requires no other equipment/wiring and works great. It's just odd the way Onkyo uses a different code set for CEC control vs the standard codes that the receiver uses. I wasn't even able to get the original remote to do it, although I assume there must be some device code for it. I can see the logic in doing it this way though, it allows more commands without conflicting with the receiver menus/power etc. _________________ URC-8820 x2, URC-10820N, Insignia NS-RC05A-11 x2, RCA RCRP05B, Potenza ST ADB, OARI06G, URC-7980, OARUSB04G, Nevo C2 x3, AOC 67100BA1-017-R, onn URC-3660, Insignia NS-RMTSNY17, IRWidget |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Sun Dec 31, 2017 3:03 pm Post subject: |
|
|
Yeah, the IR dongle only works on the Fire TV box, not the Stick. Your CEC solution is the best way to control a stick.
I've found that my Ortek IR dongles work as well as the MCE ones for a Fire TV Box, and they're a lot smaller than most MCE dongles. FLIRC is of course the most flexible since you can use any codes you wish. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Thu Dec 13, 2018 6:33 pm Post subject: |
|
|
I finally found the missing piece of the puzzle for fully controlling Fire TV via Bravia Sync HDMI CEC commands to my Sony TV. Bravia Sync commands exist for everything on a Fire TV remote EXCEPT the Menu (hamburger) button. But I found a way to access it with a macro.
If you send a Sync Menu command, you get a pop-up on the TV. Then arrow down to Device Control, then to Content List, and that will send the Menu command. So my Menu is now a macro consisting of the above steps. I had to put 250ms delays between each step except when I have 2 of the same commands in a row. In that case I had to bump the delay up to 400ms. I have a pretty old TV, so newer ones might work with shorter delays.
I had to go back to this method of control since I replaced my box with a stick. |
|
Back to top |
|
|
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Sun Jan 27, 2019 10:57 pm Post subject: IR dongle for Fire TV |
|
|
mdavej, I've got a"micro OTG cable" (ex: https://www.amazon.com/dp/B077VT6CGR/ ) that gets 5V to the Fire TV box and adds a full size USB socket (designed originally to add an ethernet-to-USB adapter to add wired internet to the Fire TV box). I want to try the method you suggested. Must I get a FLIRC IR receiver, or will an IrDA adapter work? _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Sun Jan 27, 2019 11:45 pm Post subject: |
|
|
Fire TV box already has a spare full-size USB port and would not need such a splitter at all, only one of the IR dongles mentioned earlier. Are you talking about a stick?
I don't know if a splitter will work with FLIRC, etc. or not. Definitely not IrDA as that's not designed for "consumer" IR that remotes use.
But this works for sure. I'm using it on my Fire stick.
https://www.amazon.com/Inteset-Receiver-Harmony-Remotes-Included/dp/B07KPPQFF8
The one and only review is from a Harmony user, for which this apparently didn't work. But I can tell you it just uses standard Xbox 360 codes, so no reason it wouldn't, if set up correctly. Works perfectly for me. I even made an upgrade for it with a few extras:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25479 |
|
Back to top |
|
|
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Tue Jan 29, 2019 1:48 am Post subject: |
|
|
Thanks for your reply! I have the Fire TV "pendant."
https://images-na.ssl-images-amazon.com/images/I/51cRj71%2BSTL._SL1000_.jpg
There's only one micro USB port, just like the Stick. No reason it shouldn't work. _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
jetstar52
Joined: 16 Oct 2003 Posts: 177 Location: Sacramento, CA |
Posted: Tue Jan 29, 2019 1:55 am Post subject: |
|
|
Okay, I followed your link, and the Amazon entry shows it working with my exact unit:
https://images-na.ssl-images-amazon.com/images/I/61j6SZkyCHL._SL1500_.jpg
Off to Checkout! Thanks again, mdavej! _________________ I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21248 Location: Chicago, IL |
Posted: Tue Jan 29, 2019 10:24 am Post subject: |
|
|
Hey Dave, why don't you add a 2nd review on the Amazon page explaining how to make it work, so that this one review doesn't scare people off. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|