View previous topic :: View next topic |
Author |
Message |
Ashleynrogers
Joined: 29 Oct 2017 Posts: 2
|
Posted: Sun Oct 29, 2017 5:42 pm Post subject: Needing help with a Charter Remote |
|
|
First off thank you for taking the time to read this and I hope you can help. I have the newest charter remote I believe it’s URC 1060BC2, C4000. I originally was trying to have my remotes ok/select button work on Borge the CBL fiction and the TV function. I used codes I found but managed to screw up both to where when I hit the ok button it goes to channel 0 on both CBL and TV mode....
Now I am looking to get the ok button back to functioning at the bare minimum for ge cable function. If I could get it to work for both can and tv that would be amazing. That would allow me to just use one remote instead of 2 on a regular basis. Any help is much appreciated!!! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Sun Oct 29, 2017 6:28 pm Post subject: |
|
|
Hold Setup for 2 blinks then 981 to reset remote to factory defaults.
We need the make/model of your TV to get you the correct OK code. The working TV setup code you're using now would also be helpful. |
|
Back to top |
|
|
Ashleynrogers
Joined: 29 Oct 2017 Posts: 2
|
Posted: Sun Oct 29, 2017 8:40 pm Post subject: |
|
|
My tv is a
55" Class (54.6" Diag.) - LED - 2160p - Smart - 4K Ultra HD TV with High Dynamic Range
Model numbers is XBR55X800E |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sun Oct 29, 2017 10:14 pm Post subject: |
|
|
It might be safer to use the 980 code, instead of 981, just in case there are some OEM codes pre-loaded. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
|
Back to top |
|
|
|