View previous topic :: View next topic |
Author |
Message |
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Oct 24, 2017 12:18 pm Post subject: |
|
|
Underquark, you made me laugh out load. DH was sitting right next to me and wanted to know what was so funny. Fortunately when I answered him that something on the Jp1 forum was funny, his eyes glazed over and he didn't want to know any more. You almost outed me! |
|
Back to top |
|
|
Ed
Joined: 21 Sep 2003 Posts: 262 Location: Ft. Worth, TX |
Posted: Tue Oct 24, 2017 11:46 pm Post subject: |
|
|
Today I was able to fire up my old XP computer and get RMIR V2.05, build 9 installed and running. When I tried to install my TCL P605 Roku TV upgrade onto my wife's 8910 remote, I got the following message in RMIR:
"Protocol ID exceeds 01FF, not valid for this remote. An Alternate PID is required."
I'm not sure what to do next.
Incidentally the P605 Roku TV upgrade is a work in process described in another thread (http://www.hifi-remote.com/forums/viewtopic.php?t=100890).
Thanks for any help. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Wed Oct 25, 2017 5:13 am Post subject: |
|
|
Ed wrote: | "Protocol ID exceeds 01FF, not valid for this remote. An Alternate PID is required." |
If you get this message, there should also be a box labelled Alternate PID in which you can enter a different value. The Roku (Official) protocol has PID = 021A, which is beyond the limit supported by most older remotes. Just enter a value such as 01FF (or smaller) in the Alternate PID box. _________________ Graham |
|
Back to top |
|
|
Ed
Joined: 21 Sep 2003 Posts: 262 Location: Ft. Worth, TX |
Posted: Wed Oct 25, 2017 7:58 am Post subject: |
|
|
Got it. Thanks Graham. I just chose 01FF. |
|
Back to top |
|
|
Ed
Joined: 21 Sep 2003 Posts: 262 Location: Ft. Worth, TX |
Posted: Wed Oct 25, 2017 7:06 pm Post subject: |
|
|
Hi again, all,
I just thought I'd close this thread out to thank everyone for their suggestions and entertaining comments.
Upgrading the 8810 using my old XP computer was far easier than I thought it would be. I was able to install the latest version of RMIR and Java with no difficulty. Java complained that my computer was really too old for the latest version, but I could install it anyway. I did and it works fine. My old parallel JP1 cable worked flawlessly. I had the alternative PID issue, above, but that was easy to solve. It takes 20 minutes for the old PC to boot up so I wouldn't want to use it very often. That won't be necessary, and I'll keep it around awhile longer just in case I have to do it again.
I'm going to migrate to the OARUSB04G in the near term. I've got one for me and one for my wife all ready to go, I just need time to soak up Graham's excellent documentation.
The only bad thing is that I'm struggling to get my remotes to control my TCL P605 Roku TV fully (http://www.hifi-remote.com/forums/viewtopic.php?t=100890). So, despite my best efforts so far, my wife is going to have to suffer some minor inconvenience for awhile <smiles>.
Thanks again for the help. |
|
Back to top |
|
|
|