View previous topic :: View next topic |
Author |
Message |
kanishkster
Joined: 24 Jun 2017 Posts: 2 Location: Bangalore, India |
Posted: Sat Jun 24, 2017 11:58 pm Post subject: One4All URC8308 Kameleon Remote - Unable to Reset |
|
|
Hi All,
My question is regarding a remote(One4All URC8308) that has been discontinued by One4All and even the customer support is not available anymore.
I want to factory reset my remote as few of the keys are not working (the IR indicator does not blink).
I am certain that it is a software issue, as the same keys work when I change the mode to another device (TV to DVD).
The manual says that we have to press and hold the MAGIC key to enter the setup mode and then press some other keys to do a factory reset.
However, unfortunately in my case, MAGIC key doesn't respond at all (I have tried it in all the 8 device modes).
Is there any other way of resetting this device? I have tried removing the batteries, but it didn't help (it seems the remote uses non-volatile memory).
I hope someone on this forum knows any other way of resetting this remote to factory settings? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Jun 25, 2017 4:25 am Post subject: |
|
|
Remove the batteries, press any key to get the remote to totally discharge. Reinsert the batteries and then follow the magic reset procedure in the manual.
If the Magic button is really not functioning, the options are really limited. Sometimes you can get it to work with a cable, but I've had numerous times where the only solution was a factory reset. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
kanishkster
Joined: 24 Jun 2017 Posts: 2 Location: Bangalore, India |
Posted: Mon Jun 26, 2017 7:03 am Post subject: |
|
|
vickyg2003 wrote: | Remove the batteries, press any key to get the remote to totally discharge. Reinsert the batteries and then follow the magic reset procedure in the manual.
|
Thanks vickyg2003 for the response.
I removed the batteries, pressed lot of keys and kept the remote overnight (without batteries).
But, it still remembers all the programming and also the MAGIC key doesn't work. |
|
Back to top |
|
|
|