JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Which cable for JP1.4?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
rah



Joined: 05 May 2020
Posts: 7

                    
PostPosted: Tue May 05, 2020 5:55 pm    Post subject: Which cable for JP1.4? Reply with quote

Hi,

In the "JP1 Cables" wiki page (and similar "Choose the right JP1/JP1.x interface cable - Read this first" forum thread), there are a number of different cables listed for JP1, JP1.1, JP1.2 and JP1.3.

There is mention of JP1.4 in the list of interface types and there are a number of JP1.4 remotes listed in the Remote Chart. However, I can't seem to find which cable is needed for a JP1.4 remote. It's noted that JP1.4 is a flash-type remote rather than EEPROM. However, looking at the designs for flash interfaces, only JP1.1, JP1.2 and JP1.3 designs are listed. There seems to be no JP1.4 design. No mention is made of cables for JP1.4 interfaces in any of the aforementioned wiki pages or forum threads.

Is it possible to interface with a JP1.4 remote and if so, which cable does one need?

Thanks,

rah
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Tue May 05, 2020 6:02 pm    Post subject: Reply with quote

JP1.4 uses the same cable as JP1.3, or JP1.x. We simply haven't gone back and updated all references every time a new, backward compatible interface comes out.
Back to top
View user's profile Send private message
rah



Joined: 05 May 2020
Posts: 7

                    
PostPosted: Tue May 05, 2020 6:08 pm    Post subject: Reply with quote

mdavej wrote:
JP1.4 uses the same cable as JP1.3, or JP1.x.


I see, thanks.

mdavej wrote:
We simply haven't gone back and updated all references every time a new, backward compatible interface comes out.


I don't think it's necessary to go back and update all references. It might be worth adding your first sentence to the "Interface Types" section of the wiki page though.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Wed May 06, 2020 9:15 am    Post subject: Reply with quote

The term JP1.x is meant to imply JP1.2, JP1.3, JP1.4, etc.

Bottom line, just get an FTDI or Prolific cable as described in the Wiki or below and you'll be all set.

http://www.hifi-remote.com/forums/viewtopic.php?t=16360
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control