View previous topic :: View next topic |
Author |
Message |
airauto
Joined: 16 Apr 2005 Posts: 54 Location: Longboat Key, Florida |
Posted: Thu Jan 26, 2017 2:36 pm Post subject: RMIR 2.04 quits when Learned Signals Tab selected [SOLVED] |
|
|
I'm using RM 2.04 build 10 on an old XP machine because I only have a Parallel Jp1 cable. I can download from remote URC8910B02, but when I click on the Learned Signals Tab the RM just quits, and I have to restart it. Any help would be appreciated. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Thu Jan 26, 2017 5:44 pm Post subject: |
|
|
save the downloaded file both as an .RMIR file and as a .IR file and post the files to the Diagnosis Area _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
airauto
Joined: 16 Apr 2005 Posts: 54 Location: Longboat Key, Florida |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Fri Jan 27, 2017 2:12 pm Post subject: |
|
|
It opens just fine for me and I can click on the Learned Signals tab.
I'm using RM2.04 build 14, so I went back and downloaded build 10 and it works there too.
When it quits for you, does it write to the error log? (ie, rmaster.err in your RM folder) _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
airauto
Joined: 16 Apr 2005 Posts: 54 Location: Longboat Key, Florida |
|
Back to top |
|
|
airauto
Joined: 16 Apr 2005 Posts: 54 Location: Longboat Key, Florida |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Jan 28, 2017 10:17 pm Post subject: |
|
|
Graham (mathdon) or one of the other RM experts will need to look at the error logs as I don't know what to look for. Are you using a modified RDF by any chance? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sun Jan 29, 2017 1:25 am Post subject: |
|
|
There is only one error of note in rmaster.err, and it doesn't tell me anything other than a comparison of data failed. However, looking at the Raw data in the RMIR file, we can see that there are 5 learned signals, then an unrecognizable section, followed by more recognizable learned signals (typically RC5), and later some more not parseable data.
Possibly this is normal if the remote keeps track of how many signals have been learned and doesn't bother to erase previously learned signals-- I don't know if that is the case.
I would recommend to 981 reset the remote and then download. Of course, you may want or need to save the two device upgrades before resetting. |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1417 Location: Munich, Germany |
Posted: Sun Jan 29, 2017 3:50 am Post subject: |
|
|
Looking at the log file reveals that the crash occurred in DecodeIR, FWIW. So I suspect that it has nothing to do with the parallel driver You may like to move the dlls away, at least for testing. This should also make it possible to delete the learned signals using RM. |
|
Back to top |
|
|
airauto
Joined: 16 Apr 2005 Posts: 54 Location: Longboat Key, Florida |
Posted: Sun Jan 29, 2017 4:30 pm Post subject: |
|
|
I removed DecodeIR.dll and the signals tab was grayed out. I replaced DecodeIR.dll with one from RM 2.02 beta and it worked fine. |
|
Back to top |
|
|
|