View previous topic :: View next topic |
Author |
Message |
j0ksta
Joined: 10 Oct 2016 Posts: 5
|
Posted: Tue Oct 11, 2016 1:23 pm Post subject: Need .rm or .bin from LIRC |
|
|
Hello all,
I have been trying to get this to work for about a week now with no avail. I have an LIRC configuration that works well on a raspberry pi. I am trying to convert this to work on Slingbox. I have RemoteMaster and haven't had much luck mapping to the correct protocol settings. This is for an LG STB-3000 set-top box which uses the AKB73275673 remote. I believe it uses some configuration of the NEC protocol. Any help would be greatly appreciated. I also promise to stick around, confirm working configuration, and upload created files to the appropriate places.
Code: |
begin remote
name LG_NEC
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9056 4448
one 601 1647
zero 601 538
ptrail 601
repeat 9081 2199
pre_data_bits 16
pre_data 0x20DF
gap 108229
toggle_bit_mask 0x0
begin codes
KEY_POWER 0x10EF
KEY_0 0x08F7
KEY_1 0x8877
KEY_2 0x48B7
KEY_3 0xC837
KEY_4 0x28D7
KEY_5 0xA857
KEY_6 0x6897
KEY_7 0xE817
KEY_8 0x9867
KEY_9 0xCA35
KEY_VOLUMEUP 0x40BF
KEY_VOLUMEDOWN 0xC03F
KEY_MUTE 0x906F
KEY_CHANNELUP 0x00FF
KEY_CHANNELDOWN 0x807F
KEY_EXIT 0xDA25
KEY_MENU 0xC23D
KEY_EPG 0xD52A #Guide
KEY_INFO 0x55AA
KEY_UP 0x02FD
KEY_DOWN 0x827D
KEY_LEFT 0xE01F
KEY_RIGHT 0x609F
KEY_SELECT 0x22DD
KEY_BACK 0x14EB
KEY_SUBTITLE 0x9C63
KEY_RED 0x4EB1
KEY_GREEN 0x8E71
KEY_YELLOW 0xC639
KEY_BLUE 0x8679
KEY_WWW 0x30CF #Portal
KEY_TIME 0x8976 #Timer
KEY_MEDIA 0x3EC1 #Smart
KEY_MODE 0xD02F #Input
KEY_M 0x708F #Mark
KEY_KPMINUS 0x32CD #-
KEY_PREVIOUS 0x58A7 #FlashBk
end codes
end remote
|
|
|
Back to top |
|
|
j0ksta
Joined: 10 Oct 2016 Posts: 5
|
Posted: Tue Oct 11, 2016 1:32 pm Post subject: |
|
|
FWIW, I have tried the following already:
1. NEC1-f16 Official using the full codes starting all with 0x20DF
2. NEC1 (No Repeats) using device number 251 in order to make the Fixed Data 0x20DF
3. Every LG .rm and .bin file I could find on this site, hoping that at least 1 button would work and I could copy the protocol settings, couldn't find a single one
4. All Slingbox built-in remotes, only one of which responded to the arrows and power commands: LG 6710T00017E. But, since I can't get the bin file off of the slingbox, this doesn't help me discover the protocol settings. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Tue Oct 11, 2016 2:28 pm Post subject: |
|
|
You have shown great skills. There is just one piece of trivial JP1 knowledge that is missing. The Nec1 protocol executor was written with 0 an 1 reversed, so you need when you are looking at the Hex data, you should see the complement.
So this would be Nec1 4, otherwise known as Nec1 4, 251.
For the values of the functions, enter the second byte of hex in the hex column or calculate the decimal of the hex of the first byte and enter that decimal number in the OBC column. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
j0ksta
Joined: 10 Oct 2016 Posts: 5
|
Posted: Tue Oct 11, 2016 3:16 pm Post subject: |
|
|
Thank you so much! Everything worked when I changed the Device to 4. I will upload all of the files to the File Section, and will post the link here for future lurkers shortly. |
|
Back to top |
|
|
j0ksta
Joined: 10 Oct 2016 Posts: 5
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4523
|
Posted: Tue Oct 11, 2016 3:31 pm Post subject: |
|
|
Thanks for your efforts and for posting the upgrades. I'm glad this was a good learning exercise for you. But there was no need to go to all of that trouble. Your file is essentially identical to all our other LG TV files. In the future, you should first simply try an existing file for a different model of a similar vintage +/-10 years. |
|
Back to top |
|
|
j0ksta
Joined: 10 Oct 2016 Posts: 5
|
Posted: Tue Oct 11, 2016 4:05 pm Post subject: |
|
|
The main difference is the Pro:Centric portion. This includes the codes for things such as the PORTAL and SMART buttons, which only exist for Hospitality models of LG TVs and STBs. |
|
Back to top |
|
|
|