JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

URC8200BCI-003-R Unable to download or read signature

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
Peabots



Joined: 16 Sep 2016
Posts: 3

PostPosted: Fri Sep 16, 2016 2:16 pm    Post subject: URC8200BCI-003-R Unable to download or read signature Reply with quote

I have a Slate Cleanable Remote that I would like to extend/modify keys on. Internally the remote has URC8200BCI-003-R stamped on the case.

I purchased an FTDI cable from DIYGadgets and have tried IR804, RMIR and JP2Sniffer1_4 to communicate with the device.

In IR804 the driver status returns serial/parallel driver and Delcom driver functioning properly. Check interface returns remote interface check succeeded. Raw download attempt returns JP12 read failed 0.

In RMIR2.03 Build 14 - download from remote returns error downloading from remote. Raw download returns unable to read the signature from the remote.

At this point I wanted to at least verify I am communicating with the remote and found some other threads discussing JP2Sniffer. High Level tab - download from E2 causes JP2Sniffer1-4 to hang. Utilized the Windows 10 Task Manager to end task. Low Level tab - Begin Comm>GetInfo>GetSigBlk returns:

GetSigBlk: 00B000
Processor: MAXQ612

00 00 03 00 03 00 00 03 00 00 03 00 00 00 07 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 07 00 00 07 00 00 07 00 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 00 07 00 00 03 00 00 03 00 00 07 00 00 03 00 00 07 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 07 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 07 00 00 03 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 00 03 00 00 07 00 00 07 00 00 00 03 00 00 07 00 00 03 00 00 03 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 00 02 51 53 00 02 00 02 00 02 50 52 00 08 00 C3 21 00 00 B0 00 5A 00 08 01 00 00 B0 00 00 3E 87 00 40 00 DF 0F 00 00 00 A0 32 36 30 32 30 31 FF FF FF FF FF FF FF FF 00 FF 00 FF 00 FF FF 00 00 00 FF 00 FF 00 FF FF FF FF FF FF 02 00 00 04 00 00 0E 00 00 00 B0 00 00 00 B0 A0 00 01 2C 00 FF 00 4D

This is a cool remote that I would love to be able to modify. Any help getting RMIR to work with it is greatly appreciated!

Thanks.
John
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3605

PostPosted: Fri Sep 16, 2016 3:53 pm    Post subject: Reply with quote

Is this your remote?

http://www.uei.com/product/north-america/slate-cleanable-remote
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3224

PostPosted: Fri Sep 16, 2016 10:41 pm    Post subject: Reply with quote

Recently UEI has been producing remotes with a different memory structure to the one we saw with JP1.4 and JP2 remotes. This remote is the first one with a MAXQ processor which seems to have the new structure. I'm traveling at the moment, but I can work on this in the next few days. In the meantime, try to find out if the remote can accept either macros or keymoves. That will help us to determine the button numbers.

Looks like the remote signature is 263201.
Back to top
View user's profile Send private message
Peabots



Joined: 16 Sep 2016
Posts: 3

PostPosted: Sat Sep 17, 2016 10:52 am    Post subject: Reply with quote

mdavej wrote:
Is this your remote?

http://www.uei.com/product/north-america/slate-cleanable-remote


Yes, the picture that comes up on the main link and the two left pictures below it.

Here is a link to site that has more thorough information.
http://www.urcsupport.com/urc_product/slate-urc8200/

Regards,
John


Last edited by Peabots on Sat Sep 17, 2016 11:44 am; edited 1 time in total
Back to top
View user's profile Send private message
Peabots



Joined: 16 Sep 2016
Posts: 3

PostPosted: Sat Sep 17, 2016 11:26 am    Post subject: Reply with quote

3FG wrote:
try to find out if the remote can accept either macros or keymoves. That will help us to determine the button numbers..


I am not sure how to verify macros or keymoves other than the documentation. The remote is a learning remote and you can manually program macros. I uploaded the instruction manual which shows these functions.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14203

Please let me know the method to verify the functions if I misunderstood your request.

Thanks.
John
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central