|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
Herbie
Joined: 02 Feb 2004 Posts: 81
|
Posted: Wed Sep 03, 2008 4:28 pm Post subject: Pioneer VSX-1018AH Additional Discrete Codes |
|
|
No question here, but I did find some new Discrete codes that I thought might be useful to others searching as I was:
I got my new Pioneer VSX-1018AH receiver up and running this weekend. I started with (and had a large degree of success with) Capn Trips excellent "yet another Master Pioneer" file here. This worked for most of my initial needs, but I found a few of the discrete input selects were missing.
Eventually I found this list of Pronto Codes from Pioneer here. This lead to two discoveries:
1) This includes a discrete code for the "BD" input (Blu-Ray HDMI input) that I haven't seen listed in any file, along with some other interesting codes.
For those looking for a quick and dirty discrete code for the BD input, using IRTool on the relevant section of the above file produces:
Protocol: Pioneer
Device: 165
OBC: 92
EFC: 228
Protocol: Pioneer
Device: 165
OBC: 192
EFC: 173
So this is a two-part signal, both on the 165 device.
I've added this to my copy of Capn Trips KM spreadsheet as:
INPUT: BD
OBC: 92
byte2: 2 192
2) More interestingly, this file also lists a set of commands titled "Auto Function (Simultaneous Power + Input)", with one for each of the named input devices from the other section.
I'm guessing these are special codes that will both DISCRETE ON the receiver AND select the appropriate input device with a single command. I'll have to play with these when I get home to be sure, but since I haven't seen these discrete codes listed anywhere, I thought I would call them out.
If these work as I expect, this would be a nice tool for those of us doing "power on" then "select device" in our macros, as I sometimes find that the device selection command is missed the first time around if the device is slow to turn on (or if I don't space out the commands in the macro).
Anyhow, like I said, no questions here, just wanted to contribute in case others were searching for stuff... _________________ TiVo FREAK!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too! |
|
Back to top |
|
|
Herbie
Joined: 02 Feb 2004 Posts: 81
|
Posted: Wed Sep 03, 2008 5:12 pm Post subject: |
|
|
OK, further research has identified two additional input-select codes that are not in CapnTrips file:
XM RADIO:
Protocol: Pioneer
Device: 165
OBC: 158
EFC: 254
Protocol: Pioneer
Device: 165
OBC: 204
EFC: 44
SIRIUS:
Protocol: Pioneer
Device: 165
OBC: 92
EFC: 228
Protocol: Pioneer
Device: 165
OBC: 194
EFC: 175
I went ahead and added these two plus all of the "Auto function Power+Input" codes to a new version of the file. It is posted to the file section here. _________________ TiVo FREAK!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|