Motorola vip 1853 kpn the netherland

[t4_ravenbird]

I now tried the Altibox with URC-7130 Essence 3 but that failed. It uploads OK but the remote seems to send signals that does not work. Is this about missing CPU-support in the new ZaptorOfficial protocol maybe?

[3FG]

Yes, I didn't include the code for Samsung processors. I edited my post (4 posts above this) to include it, and you should replace the entry in protocols.ini with the new version in the code block. I haven't tested it, so let us know how it works.

There is no official executor for HCS08 remotes.

[t4_ravenbird]

Hmm, no it does not seem to work.
There seems to be no change at all - I have tried to generate new rmir with protocol.ini containing only MAXQ610 and then with protocol.ini containing only S3C80 entry. Strangely, it seems to behave identical, that is ; some keys does hit a function, but the wrong one.
I would expected that with only MAXQ610 that RMIR was unable to create an upgrade at all for this remote but that is not the case?

I notice that on the upgrade editor/output tab it says "upgrade protocol not required" and then I notice that in the rdf for the remote the protocol "01 cd" is listed and this seems to be same id same as the new "zaptor official"?

[t4_ravenbird]

Sorry, my bad. After fiddling some more I got it to work. I messed up with the 'device' and 'subdevice' settings and it took a while before I found it.
So ; the settings you have provided seems to work just fine, thanks again!

[3FG]

I failed to notice that the 7130 has 01CD built in. So for that remote RMIR doesn't need the S3C80.code, since it is already built in. However, it does need the rest of the Zaptor Official entry so that it knows how to translate the device numbers, etc into Hex data for the executor.

Nice to know it is working.