JP1 Remotes

Despite not intending to, I seem to have introduced some confusion. So, let me try again to clear up several points:

1. I was responding only to pH7_jp1's earlier post. I had not, and still have not, looked at Elizabeth's file.

2. When I referred to "HT mode", I was referring to the eight device buttons at the top of the 8910 remote, not the "Home Theater" key. So, Elizabeth, the 3-bit code I save using Toadtog seems analagous to the "LKP device button to be remembered forever until another LKP device is pressed". Of course, if you want to build that capability into the extender, that's another matter.

3. Elizabeth is, unfortunately, right. Toadtog 2 and Timed Callback do use the same register. However, if you can find another unused register, either will work equally well with that other register.

So as to avoid causing any further confusion, I won't respond further unless someone asks me a question.

Have a great day all,
Don

Don, My perspective: NOTHING you said confused things. On the contrary, your every post clarified things for me. Part of the difficulty is we all have custom configurations and memory limits and the only way we can test is on our own stuff and continue communicating on the common elements, not always using the same language (HT ). Please don't go away too far.

I believe the ToadTog bits coded within the first eight do the "permanent" remembering. It's just lack of space here to do the keymoves, lack of space for additional code, and so far lack of knowledge where another empty slot might be, for people who'd like to try that trick.

I agree, Don. You only helped and I agree that all your contributions just helped clarify things. Don't go too far away and let us know if we go astray.

Standing by.

Don