Page 3 of 3
Posted: Thu Nov 26, 2009 8:52 pm
by vickyg2003
3FG, thanks for converting those files. A reboot of my machine gave me back excel. I can't figure out why microsoft's converter didn't install correctly.
Mike, Glad you got your inputs working.
John, after reading and re-reading this thread, I finally see the typo for the 71, 7A thing.
I hate that I can't see my mistakes!
Gap Protocol for 10820B00
Posted: Mon Dec 07, 2009 7:02 pm
by robsee
Hi,
I've also got one of these yamaha receivers, and I'm trying to get this working with a 10820B00 w/ EXT A7 remote. When I load this in km, and select the correct remote, I get Code not available for this remote. I tried loading it in Protcol Builder and just changing the remote type, but that didn't work. Is there something else I would need to do to get it to work with this remote ?
Thanks,
-Rob
Posted: Mon Dec 07, 2009 8:47 pm
by vickyg2003
Posted: Tue Dec 08, 2009 7:06 pm
by robsee
Hi,
There seems to be a problem with the HCS08 support. Using the predefined input 1-8 keys don't work. When I capture from the remote I've loaded the upgrade into for INPUT 1, I get:
37957 Gap-605-1700-24? Key: 71 (which is the actual OBC in KM, not 127-Key)
When I capture the output from the original I get
37957 Gap-584-1700-32? Key 56
(Both of the above are Device 122.133)
Thanks,
-Rob
Posted: Tue Dec 08, 2009 10:28 pm
by vickyg2003
Apparently the upgrade that passed, my test, didn't make it to the upgrade. A byte had the wrong value. I've updated the file. Hopefully this time I didn't miss any steps.
Posted: Tue Dec 08, 2009 10:55 pm
by robsee
Vickyg2003,
Thanks, this did the trick. I've uploaded a km file with all of the discrete inputs labeled correctly
https://www.hifi-remote.com/forums/dload ... le_id=7626
-Rob
Posted: Sat Jan 09, 2010 6:56 pm
by keenez
Hello,
After a hiatus from JP1, I'm upgrading for a new device. I'm also looking to use this file. Can I get a bit of instruction on utilization?
solved
Posted: Fri Jan 15, 2010 11:53 pm
by keenez
This was resolved in another thread. I was missing the device and sub-device when entering it into a 4 Device combo
Example:
L1 Gap-594-1743-32? 122 133 127 7A.85.0.7F
All your Yamaha GAP signals are
Device 122, Subdevice 133
Code:
key OBC 5digit efc efc
L1 000 00181 181
L2 003 00187 187
L3 006 00182 182
L4 009 00057 057
Guide 043 00091 091
m1 027 00251 251