Envision L37W698 HDTV, 2419200154P Remote

wnewell · Post by **wnewell** » Mon Jan 19, 2009 5:40 pm

The Robman wrote:I couldn't follow what it was that wnewell was seeing that was preventing him from entering the >63 OBCs, so when he posted the upgrade using the combo, I downloaded it and converted it back to the regular RC5 protocol just to see if it works. If it hadn't of worked, I would have started an investigation into what was wrong. But I would have been surprised that a bug would have existed for a protocol as old as RC5.

Nothing prevented me from entering >63 obc's once I set second device pos. to 1 and checked >63. The problem was that after the upgrade, none of the buttons that used a >63 obc worked. All the rest did. I assumed that was because the hex commands and efc's used the second choice, instead of the first of that displayed in ir.exe for hex and efc's. I'll try your km text file sometime tonight and see what happens, but since the rm output of it is so different than the upgrade code you posted here, I don't give it much hope. Will follow up later. Got other things to do right now.

Post by **The Robman** » Mon Jan 19, 2009 7:17 pm

Here's the RM file that I used to create the upgrade that I posted:
https://www.hifi-remote.com/forums/dload ... le_id=6132

wnewell · Post by **wnewell** » Tue Jan 20, 2009 1:23 am

The Robman wrote:Here's the RM file that I used to create the upgrade that I posted:
https://www.hifi-remote.com/forums/dload ... le_id=6132

After assigning the rest of the buttons, both produce the same code. I could have sworn I tried this exact same thing before but maybe I didn't. Either way they both seem to work fine. I've learned a lot though. Thank you guys much.