Page 3 of 4
Posted: Thu Feb 06, 2020 12:14 pm
by The Robman
Yes please, testing should always be learns, testing on the TV will be the final step.
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 12:31 pm
by HamburgerHelper1
not sure if this link is correct i uploaded twice and could not find it
of course having internet problems too
i think this is just the original upload
https://www.hifi-remote.com/forums/dload ... e_id=25835
Posted: Thu Feb 06, 2020 12:37 pm
by The Robman
yeah, that's still the first learn file
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 12:45 pm
by HamburgerHelper1
Correct link this time i got a debug error one time in file section
https://www.hifi-remote.com/forums/dload ... e_id=25836
Posted: Thu Feb 06, 2020 1:08 pm
by The Robman
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 1:15 pm
by HamburgerHelper1
Posted: Thu Feb 06, 2020 1:24 pm
by The Robman
Are you sure those are new learns? They look the same as the last ones.
And just in case you're curious as to how I'm reviewing the results, this is what I do.
1. Go to Options > Advanced > check Learned Signal Timing Alalysis (only need to do this once)
2. Go to Learned Signals tab
3. Click Timing Summary
4. Select Analyzed Data (lower left corner)
5. Enter 550 in Round To (lower right corner)
6. Now select Analyzed Coded
7. In the Set burst codes box:
a. for +550 -550 enter 0 (under coding)
b. for +550 -1650 enter 1
Now the learned signals should look like this (I added the breaks after every 8 bits):
Code: Select all
LEARNED SIGNALS:
CODED ANALYSES:
# Name Device Key Notes Freq Analyzed Timing Data with Coding
1 A Vol- 38462 Once: +4400 -4400; 11100000 11100000 11010000; +550 -130350
2 A Vol+ 38462 Once: +4400 -4400; 11100000 11100000 11100000; +550 -130350
3 A Mute 37736 Once: +4400 -4400; 11100000 11100000 11110000; +550 -130350
I want it to look something like this:
Code: Select all
LEARNED SIGNALS:
CODED ANALYSES:
# Name Device Key Notes Freq Analyzed Timing Data with Coding
1 A Vol- 38462 Once: +4400 -4400; 11100000 11100000 11010000 00101111; +550 -130350
2 A Vol+ 38462 Once: +4400 -4400; 11100000 11100000 11100000 00011111; +550 -130350
3 A Mute 37736 Once: +4400 -4400; 11100000 11100000 11110000 00001111; +550 -130350
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 1:31 pm
by HamburgerHelper1
yes that is new learns
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 1:40 pm
by HamburgerHelper1
i uploaded again but it does not show up
i refreshed page b4 upload so not sure why
that is about 3 or 4 uploads that are not there
Posted: Thu Feb 06, 2020 1:58 pm
by The Robman
ok, new file uploaded.
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 2:09 pm
by HamburgerHelper1
Posted: Thu Feb 06, 2020 2:20 pm
by The Robman
This one should do it:
https://www.hifi-remote.com/forums/dload ... e_id=25831
Assuming it works, the repeat count is set to 15, which is probably more than you need. You can adjust this by increasing or decreasing the dev2 value in RM.
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 2:31 pm
by HamburgerHelper1
Works perfectly and faster than just doing a macro of several vol-
Now i will have some studying to do
Thank you
Posted: Thu Feb 06, 2020 2:39 pm
by The Robman
What value are you using to get the volume at just the right level?
Struggling to create long power off for Soundbar on URC 7781
Posted: Thu Feb 06, 2020 2:47 pm
by HamburgerHelper1
Not sure yet on the value it looks pretty close to what i might need
I will use this at night when watching tv in bed
There is less outside noise at night so i can not fully judge it right now