Struggling to create long power off for Soundbar on URC 7781

[The Robman]

Yes please, testing should always be learns, testing on the TV will be the final step.

[HamburgerHelper1]

not sure if this link is correct i uploaded twice and could not find it
of course having internet problems too
i think this is just the original upload
https://www.hifi-remote.com/forums/dload ... e_id=25835

[The Robman]

yeah, that's still the first learn file

[HamburgerHelper1]

Correct link this time i got a debug error one time in file section

https://www.hifi-remote.com/forums/dload ... e_id=25836

[The Robman]

We're making progress, here's an update...
https://www.hifi-remote.com/forums/dload ... e_id=25831

[HamburgerHelper1]

here is link to new learns

https://www.hifi-remote.com/forums/dload ... e_id=25837

[The Robman]

Are you sure those are new learns? They look the same as the last ones.

And just in case you're curious as to how I'm reviewing the results, this is what I do.

1. Go to Options > Advanced > check Learned Signal Timing Alalysis (only need to do this once)
2. Go to Learned Signals tab
3. Click Timing Summary
4. Select Analyzed Data (lower left corner)
5. Enter 550 in Round To (lower right corner)
6. Now select Analyzed Coded
7. In the Set burst codes box:
a. for +550 -550 enter 0 (under coding)
b. for +550 -1650 enter 1

Now the learned signals should look like this (I added the breaks after every 8 bits):

Code: Select all

LEARNED SIGNALS:
CODED ANALYSES:
#	Name	Device	Key	Notes	Freq	Analyzed Timing Data with Coding
1		A	Vol-		38462	Once:	+4400 -4400; 11100000 11100000 11010000; +550 -130350
2		A	Vol+		38462	Once:	+4400 -4400; 11100000 11100000 11100000; +550 -130350
3		A	Mute		37736	Once:	+4400 -4400; 11100000 11100000 11110000; +550 -130350

I want it to look something like this:

Code: Select all

LEARNED SIGNALS:
CODED ANALYSES:
#	Name	Device	Key	Notes	Freq	Analyzed Timing Data with Coding
1		A	Vol-		38462	Once:	+4400 -4400; 11100000 11100000 11010000 00101111; +550 -130350
2		A	Vol+		38462	Once:	+4400 -4400; 11100000 11100000 11100000 00011111; +550 -130350
3		A	Mute		37736	Once:	+4400 -4400; 11100000 11100000 11110000 00001111; +550 -130350

[HamburgerHelper1]

yes that is new learns

[HamburgerHelper1]

i uploaded again but it does not show up
i refreshed page b4 upload so not sure why
that is about 3 or 4 uploads that are not there

[The Robman]

ok, new file uploaded.

[HamburgerHelper1]

getting there

https://www.hifi-remote.com/forums/dload ... e_id=25838

[The Robman]

This one should do it:
https://www.hifi-remote.com/forums/dload ... e_id=25831

Assuming it works, the repeat count is set to 15, which is probably more than you need. You can adjust this by increasing or decreasing the dev2 value in RM.

[HamburgerHelper1]

Works perfectly and faster than just doing a macro of several vol-
Now i will have some studying to do
Thank you

[The Robman]

What value are you using to get the volume at just the right level?

[HamburgerHelper1]

Not sure yet on the value it looks pretty close to what i might need
I will use this at night when watching tv in bed
There is less outside noise at night so i can not fully judge it right now