JP1 Remotes

Rob,

I would like to order some remotes:

1 x URC-8811 - $23
1 x URC-8910 - $20
1 x URC-9960 B01 (Kameleon - 4k EEPROM) - $39

Will these still fit in one box for $9.50 shipping to JAPAN.
Will pay with Credit Card.

CC surcharge = $4.50

$96.00 Total.

Is that correct?

Yasunori.

Yes, to all of your questions.

Rob,

Just about to send payment for :-

1 x URC-8910 - $20
1 x JP1 "Simple" parallel - $15
1 x URC-6690 - $29

postage to UK - $9.50

total = $73.50 + $2.50

Dave

Rob

How much memory does each of the following remotes that you sell have?

URC-8811
URC-8910

I need 2k. Which would you recommend?

Bob

They both have 2k so take your pick.

OK. after researching them I want the 8811. How do I go about it? Do I just send a Paypal tranfer to you and put in the remarks section what I want? If I want a parallel cable as well will I have to wait until they come in before the remote will ship?

wasatchwarrior wrote:OK. after researching them I want the 8811. How do I go about it? Do I just send a Paypal tranfer to you and put in the remarks section what I want?

Absolutely.

wasatchwarrior wrote:If I want a parallel cable as well will I have to wait until they come in before the remote will ship?

'Fraid so.

Sent payment for
(1) URC-8910 - $20
(1) JP1 USB Cables - $35
Shipping $4
CC Surchage $2.50
Total $61.50

Is it possible to pre-program Sony TV (KDF-46E2000) Input 7 discrete. I'm new to this and plan on learning, but my wife is ready to use it ASAP . Input 7 will be the AUX (in case you're wondering). Thanks!

Sure, I'll program an upgrade that will recreate the VIDEO7 signal, just be aware that your TV might not support this discrete code.

The Robman wrote:Sure, I'll program an upgrade that will recreate the VIDEO7 signal, just be aware that your TV might not support this discrete code.

Understood. Thanks!

I dropped your remote in the mail this morning. I created an upgrade called MISC/2000 which I assigned to the AUX device button. This upgrade contains all the known Sony TV functions that come from the 151 and 119 assigned to random buttons (random except for the VIDEO7 and VIDEO8 codes, which I assigned to the 7 and 8 buttons). I did this so you can test the buttons (if you like) to see if any of them do anything on your set, in case they're useful.

I also programmed a keymove to the L1 button in AUX mode, which should also select the VIDEO7 input. Even if you change the setup code that is assigned to the AUX device button (which I expect you to do), the keymove will survive and will continue to select VIDEO7 (assuming that the code works on your set).

The Robman wrote:This upgrade contains all the known Sony TV functions that come from the 151 and 119

I don't think anyone told belwig yet about the list you would be working from to do that:
http://www.hifi-remote.com/sony/Sony_tv.htm#tvd
The 151 and 119 sections of that should at least tell him what functions he may expect to find in your upgrade.
Of course most of those functions probably don't exist in his model of Sony.

Does URC-9910 include RF unit?

If not, what would be your price for it?

yesok wrote:Does URC-9910 include RF unit?

Yes

The Robman wrote:I dropped your remote in the mail this morning. I created an upgrade called MISC/2000 which I assigned to the AUX device button. This upgrade contains all the known Sony TV functions that come from the 151 and 119 assigned to random buttons (random except for the VIDEO7 and VIDEO8 codes, which I assigned to the 7 and 8 buttons). I did this so you can test the buttons (if you like) to see if any of them do anything on your set, in case they're useful.

I also programmed a keymove to the L1 button in AUX mode, which should also select the VIDEO7 input. Even if you change the setup code that is assigned to the AUX device button (which I expect you to do), the keymove will survive and will continue to select VIDEO7 (assuming that the code works on your set).

VIDEO7 worked like a champ! Now to program 1-6, and I think I'm good to go. Thanks again!